Freescale imx6 gstreamerproiecte

You need to modify Gstreamer gst-omx plugin for gst-1.0 and make proof of concept program in opengl which renders video. You will need to modify plugin decoders to use eglimage and make sink plugin which uses that texture, so it is zero-copy. Proof of concept is for my reference, so I know how I can implement that code to my program. It should set plugin property "texture" to elgimage it makes to achive zero-copy decoding and rendering. Of course, I'm doing it for ARM which has openmax IL and drivers installed and working.

we have a board having a freescale mpc8360 processor. The processor has an 8Mbps TDM interface. It already has linux 3.7.4 version ported. we are looking for device driver for 64/128 channels to configure MCC in HDLC and SS7 modes.

Project is described in detail in the following Google Document; Project includes the following; Step 1 ---------- This work will split the speaker detect module developed in Phase 1 into two modules; * Standard GStreamer FaceDetect * Speaker Select - Selection and then tracking of an individual speaker. --->> This step should include comprehensive tests. <<---- Step 2 ---------- Camera Control - Takes input from speaker tracking module and outputs commands to actually make the camera * Include support for Panasonic HE100 series camera * Include support for VISCA series camera Step 3 ---------- Integrate system into gst-switch There should be support for; * Selecting the

I need to configure a server for streaming logitech c920 mjpeg/mp4 hardware stream. NO TRANSCODING. I want to have a fast streaming with less latency as possible. The solution must be implemented on a linux server (ubuntu server), idealy on a raspberry pi with no GUI os if suitable. gstreamer, ffmpeg, vlc and other open source solutions would be prefered. The stream will be read on web browser and android/ios client apps.

Design of Firmware for energy meters employing Microcontrollers such as - Maxim / Teridian, TI, Freescale, Atmel etc. Candidate must have knowledge of Embedded C, RTOS, HLD & LLD. Design for Manufacturability and Reliability & Value Engineering. Should you require further details, it can be provided.

I need a simple iPhone/...for building a singleton * (PossessionStore *) defaultStore; - [void] removePossession:(Possession *)p; - (NsArray *)allPossessions; - (* Possession *) createPossession; - (void) movePossessionAtIndex:(int)from toIndex:{int} to; #end Note: I explicitly need a WiFi solution which can also support/fallback to Bluetooth. GameKit can be used as long as no logging in is necessary. gstreamer or ffmeg also possible. If there are some restrictions about data size with bluetooth, try to transfer it with several packets and/or pack the audio stream data (but only on users approval). Be creative :) To the quiz: There are not only syntactical errors, but also semantic ones influencing the syntactical layer :) The lucky winner will have noticed t...

...images on canvas, List of lines/rectangeles/ellipses, List of strokes of pen. - I should be able to get a color of a pixel on canvas. I will need these data in next phases All codes must be open source and free for all purposes of use including academic, commerical, individual use etc. I will share original xml file and json with you for tests I know there are free media viewers like gstreamer etc.. So it would not be so difficult for a junior/senior gtk programmer...

Develop board and firmware for a serial-to-GPRS bridging app with custo...serial-to-GPRS bridging app with custom I/O, process, and connectors. Programmer will use MQX RTOS, RTCS with UDP & TCP stack (GSM module does not embed a TCP stack), manage GPRS connexion (ie. AT commmands, PPP). See the attached document for hardware and software specifications overview. Scope of work: 1. Board design (PCB design, component selection, validation) 2. Firmware development (for Freescale Kinetis using MQX RTOS/RTCS with Code Warrior) 3. Supply of 2 prototypes (GPRS module and DigiXBee will be provided by us) 4. Validation 5. Manufacturing file Code to be provided with full comments (for Code Warrior) PS: please note that we are the initial poster of this project (first post...

Develop board and firmware for a serial-to-GPRS bridging app and several dedicated I/Os and connectors. Programmer will use MQX RTOS and a TCP & UDP stack as the GSM/GPRS module used does not embed a TCP/IP stack. See the attached document for hardware and software specifications overview. Scope of work: 1. Board design 2. Firmware development 3. Supply of 2 prototypes (GPRS module and DigiXBee will be provided by us) 4. Validation 5. Manufacturing file Code to be provided with full comments (please precise if you use CodeWarrior or not)

need to make wifi on tower ar4100 with laptop and then 2 towers beetwen is a demo about this on freescale.

change user-agent of the http header that gstreamer sends to remote server and re compile for enigma2 satellite receiver (mips cpu)

Develop and produce C source code for the Freescale MPC5634 microcontroller using the TRK-MPC5634 evaluation board. The software will have two functions: 1) At boot up time, if a PC requests the microprocessor memory to be programmed over CAN bus, the bootloader will handle firmware and data area programming. The Windows PC software, USB-CAN interface, programming communications protocol will all be provided. These are already developed and working. The firmware and data areas will be arranged in the on-board Flash EEPROM of the MPC5634 as listed in the memory map below. The bootloader must communicate with the PC software over CAN bus, erase Flash EEPROM sectors as required and write the binary data received from the PC to Flash memory. The bootloader will be able to support CAN...

I have a hex file that I need to flash onto a Freescale MC9S08QD4CSC microcontroller. To do so I bought a P&E Micro USB Multilink Interface () and wired it to an socket adapter (). I put the microcontroller into the socket and now I am trying to flash the hex file onto the device but CodeWarrior is confusing me so I cant accomplish it. I need you to help me flash that hex file with CodeWarrior or any other software via remote control with teamviewer TODAY.

This is an advanced automotive pr...control unit that will work between the Engine control Unit and sensors. The information or signals will be modified by user to create different conditions to an internal combustion engine. Being an automotive tuner, I am able to help in the process of creating the unit but have less experience in electronic design and hardware. After the process being explained, the worker will work with the Freescale 5634M for the project. We would also would like to accomodate FPGA if its an added advantage for the system. Suggestions will be made on the construction of the hardware and software and options to be added to the project. Project will begin after the worker has estimated a price for the project along with the specifications of the project ...

We are using a Gumstix Overo computer on module with embedded linux for a wireless video streaming project we are working on. Our goal is to send and receive a real-time video feed from a camera connected to the 27 pin camera connector on the gumstix, to a remote desktop on the same wifi network. We are planning to use Gstreamer as there is a Texas Instruments plugin for gstreamer that allows us to use the DSP on the Gumstix module to compress the video. We don't have a lot of experience with Embedded linux and we could use some of your consulting help to get us moving along with the project faster.

...module in gstreamer () into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. This project is part of a larger project to create an automated video recording system, with the eventual goal of getting every talk at a User Group (such as Linux, Python, etc) recorded and live streamed without needing people with the knowledge how. Further work may be offered after completion of this project. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found i...

We have a tool with an on-board system controller that appears to have a bug in the Cosmic C code, and we would like to get it fixed. Preferred experience. 1) Embedded C programming alterations/debugging using Cosmic C/ZAP for the Freescale 9S12 family 2) VB6 GUI programming alterations Using Visual Basic 6 for GUI alterations Looking for someone in the US - preferably in Texas. Please quote hourly rate.

We have an HD video encoding project in which we need to modify some standard script to make our embedded system work properly. Moderate to advanced Gstreamer knowledge is required.

The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows the current mode and position of the "active person" overlay on the input.

On the image SIFTeam enigma2 extreme edition for DM. There's a binary named gst-launch that is used to play streamed video that uses a plugin named playbin2.. This plugin has the ability to show a subtitle track, but it is not automatic, there's a flag that needs to be turned ON and it has to be turned on manually... What we need, is that gst-launch/playbin2 plugin do this in automatic for the first track, so we need someone to modify this (We even have a tutorial to do so).. We need this to be compiled for Dreambox 800 processor.. The deliver can be a single binary so we can freely include it just by copying it (preferred) Or it can be a DM800 SIFTeam enigma2 extreme edition image..

We are currently running Fedora Core 17 with gstreamer plugins: good, bad, ugly and the associated extras pages installed. We need a pipeline that will produce AUDIO & VIDEO output via Black Magic's Decklink SDI output using the decklinksink plugin. However, we have success outputting only video via decklinksink and we need audio too. In the event that the existing decklinksink does not work, we would need a plugin for gstreamer that will. The sources for gstreamer and decklinksink are all available from

We have a modular scale locomotive digital command control product in development. PCB design is complete and uses the Freescale SemiConductor MC 13224V as the processor. The system uses two different PCB's for motor control and the processor. There are two BOM's for the Power PCB, the difference being the integration of a Li-PO battery management IC and fuel gauge in one version and the other without. The Processor PCB has four possible BOM's. Sound/Wireless, Sound/No Wireless, Non-Sound/Wireless, and Non-Sound/No Wireless. The MC 13224V uses an ARM7 compiler which is written in either C or C++. To break up this project, the initial firmware will include: Non-Sound Digital Command Control - this is a system of using the alternating current del...

...some experience or at least a good spirit for the Freescale Kinetis microprocessor family. What we are currently looking for is a USB Host Bootloader firmware for the KL25 chip from the Kinetis L family which consists of a Cortex-M0 ARM processor. The processor can be found on the inexpensive Freescale Freedom board () which is also why we would like to use this board for the development. To make this project even easier for the freelancer and hopefully also more inexpensive for us, the development should be based on the following Freescale Application Note about the same subject: Freescale has already provided the required source code for this

# Extend "facedetect" module in gstreamer into full speaker tracking system. The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows

# Extend "facedetect" module in gstreamer into full speaker tracking system. The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows

I follow this tutorial to create the kernel and filesystem with gstreamer and I got everything compile and running on the board, with expection of gstreamer, and the camera does not display when I use the command v4l2-ctl --all but it does display when the kernel loads up. the project help me figure out this problem to get gstreamer working with the camera. in the attachment you can see the logs.

We need a team of programmers to develop and validate the firmware for a small, embedded design built around an MC9SS08GW32 processor. The main components of the project include the microprocessor, a numeric LCD, a few simple sensors (digital I/O), one UART port and an infrared port. The firmware will gather data from the sensors and display the result on the LCD. The processor stays in low power mode for most of the time, an it occasionally wakes up to collect information from the sensors. It uses the UART port or the infra-red port to communicate with the outside world. It is not a very complicated project, but the result has to be high reliability. Once the product is deployed in the filed, it has to operate correctly for ~20 years using a single AA lithium battery. We are open for n...

I follow this tutorial to create the kernel and filesystem with gstreamer and I got everything compile and running on the board, with expection of gstreamer, and the camera does not display when I use the command v4l2-ctl --all but it does display when the kernel loads up. the project help me figure out this problem to get gstreamer working with the camera. in the attachment you can see the logs.

I am looking for embedded linux programmer for MCU from Freescale. We are using OLinuXino-Micro from Olimex. The board will be used for monitoring of 1. digital input : such as status of sensors, 2. analog input : such as temperature sensor, 3. energy meter via MODBUS/RS485 and controlling Relays, For connectivity, we need 1. Short range wireless (ISM band) such as RFM12B 2. USB WiFi module and/or USB GSM modem. Only qualified programmer will be invited.

# Extend "facedetect" module in gstreamer into full speaker tracking system. The aim of this project is to extend the OpenCV "facedetect" module in gstreamer (<>) into a robust speaker tracking module. The facedetect module currently detects faces and emits the position of each face on the gstreamer bus. The project will production of the following; * Forking and renaming the "facedetect" module into a "speakertrack" module. * Adding "detection" and "locked" modes to the module. More details about these modes and how the transitions work can be found in the details section. * Creation of a small gstreamer based program which utilities the module and shows

...Shall include network discovery and setup options. The gateway shall be used to read the values from the nodes whenever possible. Over the air programming is desired but not compulsory Architecture The Architecture shall comprise of either Fully Integrated SoC with energy measurement/Control and Wireless transceiver MCU(Atmel wireless MCU or TI wireless MCU or Freescale) Or Modular AFE with dedicated metering ICs(Analog,STM,Freescale NXP,TI)+ and wireless transceiver Whichever is cost effective. Shall provide reference designs to start off with, a slight modification of the schema, pcb design and inclusions can create a full fledged should make the overall job easy Provider qualifications The provider shall be based in India and well versed in PCB design, Embedded systems...

I need the calculations of a VB6 project performed in Freescale Firmware, micro MCU 8BIT 128K FLASH 64-LQFP . Part number on chip is: MC9S08DZ128 CLH 2M78G In the project files I've attached are some Freescale code with input and output via USB, calculations, and displaying results on the LCD display. I've also attached the VB6 code I need duplicated. When you start the project by clicking on the "Do Calculations" button, a browser window opens up. Pick the data file "July 1 cam " and the calculations are performed and displayed in the VB6 project. First the VB6 reads in all data from the file, which somewhat repeats every 150-400 data points or so. Then it searches for just 1 of the cycles to perform calculations on. W...

# Speaker tracking using OpenCV and Gstreamer The aim of this project is to create a gstreamer module which will use a Pan, Tilt and Zoom camera to track a person around a stage. The aim is to allow a presentation recording system to operate without needing a person controlling the camera. **When putting in an bid please include links to any previous C or Python code you have produced.** Experience with gstreamer or OpenCV is not required but **highly desirable**. The module will have two modes; * In "detection mode" waving with your hands at the camera should cause the camera to transition into "locked mode" with the person who was waving their hands as the "active person". * In "locked mode" the camera will follow the...

Înregistrează-te sau Conectează-te pentru a vedea detaliile.

...work on an ARM embedded module that will likely require a bit of electrical engineering too, and I've found this company who does a lot of work with the processor I think we want to use. I was curious if you had any experience with them. I want a little piece of hardware that will take HDMI input, encode the video from that input port and make it available through wifi Freescale makes a processor called the iMX6 which supports hardware encoding of up to 1080p and has integrated wifi. iWaveSystems uses this processor in their custom development and i think we can use some Microsoft frameworks to do this development easily This is the closest thing I've found: This product would have application anywhere a camera is mobile... in stadiums, theate...

Using gstreamer and VLC, I require an android application that can render a stream that is pushed over a local wifi network. The stream could use any of the popular protocols such as rtmp, rtp, rtcp & rtsp. The application needs to be designed based on the mockups that I shall provide. The deliverable will be the completed application along with the source.

Must be able to write C for MQX RTOS for a Freescale K60. Understand RTOS and Ethernet RMII modules. Must have had MQX or other similar Freescale Embedded experience. Experience with Codewarrior 10.2, Eclipse based. CGI callback method in MQX Able to use Skype for Teleconferencing 1) Write Application code to take measurements from log file and display them on webserver through RMII interface 2) Create Log file in uSD card 3) Understand STOP/WAIT modes This is Phase I of development, if performance is acceptable, would be able to provide more details of project. You will be working from design documentation generated from my direction. Need Freescale K60 TWR Kit with Serial Module (Can provide if necessary) Optional P&E Multilink Universal...

Using gstreamer and VLC, I require an android application that can render a stream that is pushed over a local wifi network. The stream could use any of the popular protocols such as rtmp, rtp, rtcp & rtsp. The application needs to be designed based on the mockups that I shall provide. The deliverable will be the completed application along with the source.

seeking a consultant to create a QT on Linux based multitouch application (embedded systems) running in the following environment: Processor: Freescale Processor speed: 486MHz Touch screen type: Captive touch screen Display: 3 ½ inches Operating System:  LINUX version 2.6.31 GUI development Tool: Qt from Nokia

A guy who has experience of developing GUI with multi-touch application using QT embedded(handling QWS server) tool in Linux OS environment. The Multi Touch library used: TSLIB Processor: Freescale Processor speed: 454MHz Touch screen type: Capacitive touch screen Display: 3 ½ inches Operating System: LINUX version 2.6.31

The project is to implement a VRR on a Modcon Board mc9s12a512. All the coding is to be done in Freescale CodeWarrior. The basic code with all timers and clocks is set up up already (as this project is in continuation with other projects done on the same modcon board). So, the task is to add the functionality of VRR to the existing code as per the specifications for the VRR (provided in the attached pdf). Also, help files and references, and a pseudo code guide on what basic functions to implement will also be provided. If you would like to have a look at the existing source files, please message me so I can send them to you. This project is URGENT, needs to be completed within the next few days (As you will see from the details, it should not take a lot of time anyway,...

We are using the gst-rtsp-server in gstreamer to stream content over rtsp. We are doing live transcoding i.e. transcoding a stream that we are pulling from a http link, onthe fly and then streaming it over rtsp. Seek is not working correctly with gst-rtsp-server. We need help in modifying gst-rtsp-server so that seeking works correctly and then we'll integrate that into our code. This could be a matter of fixing a bug in gst-rtsp-server or maybe even guiding us towards the right libraries where this bug has already been fixed. Thanks, Rohit

Hi All, I am having a product where in we are using gstreamer to stream our multimedia content which i am able to do successfully. Although i am able to play the stream on my VLC/real media player but whenever i try to seek the video the player either crashes or the stream stops there abruptly. Please bid if you have good exposure to rtsp streaming and gstreamer. Thanks

Design a WiFi enabled thermostat / HVAC controller based on an existing micro controller header board and existing plug-in WiFi module. The Micro controller is from the Kinetis K60 family made by Freescale. The project deliverables are the following: 1.) Design document with parts selection and engineering calculus 2.) Electrical schematic (Orcad Schematic capture preferred, other CAD formats accepted, PDF) 3.) Layout file (Orcad Layout 10 preferred, other CAD formats accepted,) 4.) Gerber files for manufacturing (including manufacturing ready panel) Optional negotiable items: 1.) Test Firmware 2.) Final product Firmware (please contact us if you are interested in developing FW for this product) A lot more details are included in the attached file.

Hi, I'm looking for developer to continue in our rails application for IP set-top-boxes as IPTV platform. Basically we need some other application like news that has to be reformatted for IP STBs etc. Length of the...application for IP set-top-boxes as IPTV platform. Basically we need some other application like news that has to be reformatted for IP STBs etc. Length of the project: 6 months Required skills: - rails (including cucumber and rspec frameworks) - C language to hack opensource C projects - linux (you should know IPC principals, some unix C API) - git - best would be to know gtk++, cairo, gstreamer, clutter etc. (or ability to learn them quickly - I can help with them) Please send me also PM with our skills and why I should choose your offer. Than...

To create a custom RTSP server over gstreamer. This server would be able to a) handle multiple simultaneous connections 15-30 simultaneous connections b) transcode a media file on the fly while transmitting the file as it's being trancoded over RTSP Thanks, Rohit +91 9811115987

Înregistrează-te sau Conectează-te pentru a vedea detaliile.

Design a 1"x 1.3" header board based on Freescale Kinetis K60 microcontroller. Starting point will be the reference design published by Freescale for the TWR-K60N512. The module must have 2x40 pin high density surface mount connectors on top and bottom for connectivity. The design must include all the supporting components needed for the K60 processor. Pinout of the connectors and connector position on the PCB will be provided. The deliverables of the project are schematic and PCB layout. Orcad 16.0 is preffered, other CAD software is acceptable.

Hi, I have a program based on openGL written in C. Platform is Linux, i686 and hardware is exactly defined. I need a video player in it, and I intend to make it with Gstreamer. Video will be displayed on openGL texture provided by my program. Audio will be played as simple as possible, probably with alsasink or similar with ability to choose which one to play if there are various options. There are two types of video that will be played: A) HD video - Using gstreamer-vaapi plugin and modifying vaapisink element to use our texture for displaying (not to create texture and window) B) RTP or UDP (you can choose) streams (MPEG2 TS) - Making pipeline that will be able to display streams property and start them fast enough. - If stream is HD it will be decoded ...

Hi, I have a program based on openGL written in Java. Platform is Linux, i686 and hardware is exactly defined. I need a video player in it, and I intend to make it with Gstreamer. Video will be displayed on openGL texture provided by my program so you have to figure out how to connect Gstreamer with it. Audio will be played as simple as possible, probably with alsasink or similar with ability to choose which one to play if there are various options. There are two types of video that will be played: A) HD video - Using gstreamer-vaapi plugin and modifying vaapisink element to use our texture for displaying (not to create texture and window) B) RTP streams (MPEG2 TS) - Making pipeline that will be able to display streams property and sta...