Mems gyroscopeproiecte

Filtrare

Căutările mele recente
Filtrează în funcție de:
Buget
la
la
la
Tip
Aptitudini
Limbi
    Starea proiectului
    1,121 mems gyroscope proiecte găsite, la prețul de USD

    As the client, I'm seeking a talented freelancer to help advance my audio project by adding key features. The device is a handheld one, meant for recording and playing audio. You will be tasked with: • Implementing Active Noise Cancellation (ANC) • Integrating Bluetooth Low Energy (BLE) Prior progress includes the selection of a MEMS mic and Codec. Ideal Skills: • Demonstrable experience in ANC development • Proficient understanding of Bluetooth Low Energy integration • Familiarity with STM32 Microcontroller This project needs a meticulous freelancer, as attention to audio quality is imperative. It's also crucial to possess an understanding of sound engineering principles and handheld device form factors.

    $320 (Avg Bid)
    $320 Oferta medie
    6 oferte

    ...searching for a skilled electronics engineer well-versed in Arduino nano, specifically working with accelerometer or gyroscope technologies. Your skills and experiences will be crucial in creating a captivating, efficient fitness tracking wearable device, which will connect via BLE with Android mobiles, due to Android being our primary target platform. Your tasks will involve: - Developing an Arduino nano-based wearable device. - Incorporating accelerometer technologies for tracking steps and distance. Ideal skills: - Strong proficiency in BLE programming - Previous experience in similar wearable device development - Extensive knowledge about accelerometer or gyroscope - A deep understanding of interfacing with Android platform. Feel confident that this project all...

    $97 (Avg Bid)
    $97 Oferta medie
    5 oferte

    I'm seeking a skilled professional to construct a Pedestrian Dead Reckoning (PDR) model, focusing on high-accuracy location, heading, and floor level estimations. The model should leverage data from various smartphone sensors, specifically , gyroscope, barometer, accelerometer, and magnetometer. Key requirements include: - Strong understanding of sensor-data interpretation. - Extensive experience with PDR modelling. - Contribute towards achieving high-accuracy results (within a few meters). Your expertise will be instrumental in refining the reliability and precision of the PDR model.

    $145 (Avg Bid)
    $145 Oferta medie
    20 oferte

    We need a device that captures raw accelerometer and gyroscope data, push/force sensor readings, real-time GPS accurate to cms, memory function, weight sensor, and user-taggable GPS locations. The device should have an LCD screen and buttons for user interaction. We are open to make changes in order to curb the cost of the product like(removing lcd screen and controlling it via phone because we will be developing a mobile app as well) Key Requirements: Raw Accelerometer and Gyroscope Data Push/Force Sensor Integration Real-Time GPS Location Embed (Accurate to cms) Memory Function Weight Sensor User-Taggable GPS Coordinates LCD Screen with Buttons Connectivity: Real-time data transmission to mobile app via Bluetooth or Cloud User/App Interaction: LCD screen and buttons f...

    $84 (Avg Bid)
    $84 Oferta medie
    4 oferte

    We already have our own app development team, we just lack an algorithm. You only need to write an algorithm and use the mobile phone's acceleration sensor, gyroscope and magnetometer to determine the three-dimensional g value of the vehicle where the mobile phone is located. Here's what I'm looking for: - Leverage data integration from the accelerometer, gyroscope, and magnetometer. What I want to see in your code: - Filter out misjudgment interference caused by operating mobile phones - The position of the mobile phone can be placed arbitrarily. - Can filter out some clutter interference. Ideal skills and experience: - Proven experience in sensor data integration and manipulation on Android devices - Strong background in physics, particularly in acceler...

    $2618 (Avg Bid)
    $2618 Oferta medie
    24 oferte

    I am looking for a skilled android app developer who can create an Android demo app for a step counter. The app should be able to retrieve data from the gyroscope, accelerometer, and gravity sensors in an Android device. Aside from creating a responsive and user-friendly interface, the primary focus is to utilize these data inputs to calculate the number of steps taken by a user with high accuracy. Expectations: - The app must feature robust step counting functionality using gyroscope, accelerometer, and gravity sensor data. - High level of accuracy in step counting is required, making it suitable for fitness and health applications. - It should be compatible with any Android version above 8.0. Skills Required: - Strong proficiency in Android app development. - Experience w...

    $203 (Avg Bid)
    $203 Oferta medie
    33 oferte

    I am looking for a skilled android app developer who can create an Android demo app for a step counter. The app should be able to retrieve data from the gyroscope, accelerometer, and gravity sensors in an Android device. Aside from creating a responsive and user-friendly interface, the primary focus is to utilize these data inputs to calculate the number of steps taken by a user with high accuracy. Expectations: - The app must feature robust step counting functionality using gyroscope, accelerometer, and gravity sensor data. - High level of accuracy in step counting is required, making it suitable for fitness and health applications. - It should be compatible with any Android version above 8.0. Skills Required: - Strong proficiency in Android app development. - Experience w...

    $475 (Avg Bid)
    $475 Oferta medie
    15 oferte

    ...events possible based on random generation, and every new event created must be realistic and based on the last events generated, so we can simulate a realistic sensor data like the original Android function does. Key project tasks include: - Generating gravity and magnetic data for Orientation sensor events - Generating data for Motion sensor events, specifically for the accelerometer and the gyroscope - These events must be generated from a clever way respecting the timestamps, for example, the class will include a property called EventTime where we must specify the time that the event ocurred, as we said, we don't want to include the actual timestamp because it is generated, we should simulate also the example. For example, every 5 seconds a new event is generated, so th...

    $142 (Avg Bid)
    $142 Oferta medie
    11 oferte

    $50 - Get my Arduino drone to fly!! I have an Arduino hex drone that I am making, and I need it to fly in a route to 2 locations, then return to base, from server command. It has: - Arduino Mega - gyroscope MPC60 (giving negative values, but working) - LoRa chip for sending / recieve data (working good) - ultrasonic sensor for height (working good) - barometer (not used) - 6 motors with ESCs Current issues: - stabilization from gyroscope - hovering in place - fly to 3 locations - server command (LoRa command from other Arduino) If you can help me with better C# or code, to get everything working correctly, will be great & can give 5 stars feedback This can turn into more jobs too, we are a small drone company and I work on this every day. Can hire assistant to help...

    $30 (Avg Bid)
    $30 Oferta medie
    10 oferte

    Ive got a IO board made for RPI CM4. Peripherals: 5x Proximity sensors (GPIO 5, 24, 23, 17) 2x RPi Cam Module v3 1x DC motor (24V 2A) DRV8874 (EN - GPIO13, PH - GPIO 18, nFAULT - GPIO 14, nSLEEP - GPIO 27 1x Microphone (IS2 MEMS, SPH0645, SPI0_CE0_N - GPIO 8, SPI0_MOSI - GPIO 10, SPI0_MISO - GPIO 9 - using all these on ALT4 function mode on CM4) 1x Amplifier + Speaker via mono PWM audio output on GPIO12 1x Press button (GPIO 11) 1x Status indicator LED (GPIO 25) 1x Temp sensor (GPIO 2) As a cost saving solution I wish to change this Rpi CM4 to a Orange Pi CM4 using the same IO board. Orange Pi CM4 has one ALT1 function. The question is if I can really interchange RPi with OPi CM4. Scope of this project: * Writing a custom firmware based on Python, Armbian or Orange Pi OS. * T...

    $274 (Avg Bid)
    $274 Oferta medie
    18 oferte

    I'm in need of a talented engineer to develop a MEMS (Micro-Electro-Mechanical Systems) recording circuit specifically tailored for medium fidelity voice recording applications. This project is aimed at achieving a substantial quality that aligns with standard podcast audio requirements, utilizing battery power to ensure portability and ease of use. **Key Requirements:** - **Audio Quality:** The circuit must be capable of capturing and recording voice with clarity and precision, suitable for podcast productions. Medium fidelity is our target, balancing quality with hardware constraints. - **Power Source:** Design should be optimized for battery operation, with considerations for power efficiency and longevity. - **Portability:** Given the battery power, the design must also f...

    $139 (Avg Bid)
    $139 Oferta medie
    6 oferte
    Vertical Alert WatchApp S-a încheiat left

    I'm looking for a skilled developer to craft a unique app for the Apple Watch that utilizes both accelerometer and gyroscope sensors to detect the orientation of the watch. Here's what I need: - App to emit vibrations when the watch is vertical. - Use both accelerometer and gyroscope sensors for precise position detection. - Implement repeated vibrations to signify continuous vertical orientation. The ideal candidate should have the following expertise: - Proficient in watchOS and familiar with its accelerometer and gyroscope capabilities. - Experience in creating apps with haptic feedback. - Ability to write clean, maintainable code. I expect the freelancer to communicate effectively, stick to deadlines, and demonstrate past work that shows their capabil...

    $19 / hr (Avg Bid)
    $19 / hr Oferta medie
    27 oferte

    As the project owner, I am in search of a skilled Python programmer to assist me in extracting specific features from smartphone sensor data. My main focus is to develop an application that uses extracted data for the specific purpose of ADHD monitoring. You will primarily be working with Accelerometer data, Gyroscope data, application usage, screen, touch,keyboard,location and Magnetometer data. Through these, we aim to accomplish several tasks: • Monitor hyperactivity levels: Highly experienced in working with sensor data, you'll be able to draw meaningful conclusions from the constant movement of the device. • Track attention span: Your knack for pattern spotting will be crucial in finding correlations in the data to indicate when and where the user's atte...

    $380 (Avg Bid)
    $380 Oferta medie
    22 oferte

    ...generated Data Must have a high accuracy - Processed data must be consumed in real time - Each processes data must include the AVL_ID - Timestamp - Missing Ignition Simulated when is missing (Using Mobile_Device) - CAN Bus/OBD data (Speed/Odometer/Movement) Based on availability DEPENDENCY: - AVL_ID or/and Mobile Device_ID - Timestamp - Ignition Status (Vehicle ON/OFF) - GPS Coordinates - Gyroscope Data (If available) - G-sensor & Accelerometer - OSRM (Open Street Map) (Free Service) - CAN Bus/OBD Accuracy Validation (Based On availability) TECHNICAL NEEDED: - Kalman Filter for GPS and Accelerometer Data (Used for filtering noise and inaccuracies in the GPS and accelerometer data) - Bezier Curve Algorithm (Used for smoothing the polylines on the road.) - Linear Interpola...

    $224 (Avg Bid)
    $224 Oferta medie
    22 oferte

    ...designs have been open sourced. Desired PCB Size: - Small form factor Component Population: - The PCB needs to be populated with components Connectors and Interfaces: - Specific requirements for connectors and interfaces on the PCB - also needs one of the components to be interfaced with a flexi cable in its own thermally insulated and heated compartment for vibration isolation (gyroscope and baroscope) Ideal Skills and Experience: - Proficiency in PCB design and schematic creation - Familiarity with the Pixhawk reference design - Knowledge of small form factor PCB design - Experience with component population - Ability to meet specific connector and interface requirements All standards and designs can be found here : Looking for

    $398 (Avg Bid)
    Acord de confidenţialitate
    $398 Oferta medie
    10 oferte

    I am looking for an experienced freelancer who can help me with the analysis of the MEMS-based piezoelectric energy harvester. Ideal skills and experience: - Expertise in COMSOL simulation software - Experience in MEMS piezoelectric energy harvester design and optimization - Strong understanding of MEMS and piezoelectric behaviour - Ability to deliver high accuracy simulation results - Excellent communication skills to ensure smooth collaboration throughout the project.

    $86 (Avg Bid)
    $86 Oferta medie
    11 oferte

    ...7) Latest parts and future proof technology Please note: Detailed technical requirements can be given at later stage and we are open to change them based on your suggestions as it may be technically required to improvise the end product. Required Skills - • Product Design • Microcontrollers and processors – Various MCUs ESP, STM, NXP, F7 • PCB designing - KiCad • Sensors – Accelerometers, Gyroscope, magnetometer, barometer etc • Communication - UART, SPI ,I2C, CAN, PPM, SBUS, iBus, RSSI etc • Power supply management • Knowledge of flight controllers and open source software • Firmware Development and modification Knowledge of the following hardware/software/firmware and their functioning will be a plus • ESCs, GPS, Tra...

    $2004 (Avg Bid)
    $2004 Oferta medie
    14 oferte

    I am looking for a MATLAB programmer to implement a specific published research paper, which will be provided. The deadline for this project is more than 6 weeks. Requirements: - Implement in MATLAB a simple simulation of a marine, ground, and an air vehicle trajectory providing GPS position, velocity, 3-axis accelerometer and 3-axis gyroscope measurements. The simulation should be similar to the simulation and experimental results in the paper and is required to show that the paper was implemented correctly. - The marine vehicle will be moored where changes in roll, pitch and yaw occur. - Implement in MATLAB an Unscented Kalman Filter as proposed in the research paper as well as any other equations defined in the paper. - Ensure that the code is commented such that each equati...

    $496 (Avg Bid)
    $496 Oferta medie
    31 oferte

    ...and processing is an embedded system. Therefore, ideal candidates for this task should be highly proficient in embedded system design and development, and should have a solid background in working with MEMS peripherals from STMicroelectronics. The main goal of this project is for use in motion tracking and orientation sensing, which warrants a brilliant grasp of sensor integration. Relevant experiences in these areas will decidedly be advantageous. Potential freelancers should also consider the following: - Efficient and accurate data fusion algorithm formulation - Skilful integration of MEMS devices with an embedded system Candidates are encouraged to include their past experiences with similar projects, and also include how they handled challenges along the way. This...

    $73 (Avg Bid)
    $73 Oferta medie
    8 oferte
    stm32 firmware development S-a încheiat left

    I am looking for a freelancer to develop firmware for my stm32 project. The ideal candidate should have experience in C programming and be able to start from scratch. The firmware should have the following features: - Board to be used: NUCLEO-G431RB Sensors: X-NUCLEO-IKS01A3 - Data collection and processing: The firmware should be able to collect data from the gyroscope and accelerometer, using I2C if you are capable of doing this I have a lot more projects right after this. If you are skilled in C programming and have experience in stm32 firmware development, please submit your proposal.

    $19 / hr (Avg Bid)
    $19 / hr Oferta medie
    31 oferte

    I am looking for a freelancer who is experienced in Arduino programming to assist me with a project involving control mechanisms. Purpose: - The purpose of this Arduino programming project is to develop control mechanisms for my setup. Hardware Setup: - I already have a predefined setup that needs to be used for this project. Control Mechanisms Complexity: - I require basic to middle complex movements for the control mechanisms. Skills and Experience: - Proficiency in Arduino programming is a must. - Experience with servo motors, GPS, SD cards, pitot tubes, Alpha vanes, and gyroscopes is ideal.

    $187 (Avg Bid)
    $187 Oferta medie
    17 oferte

    I am in need of a freelancer to design a small...of a freelancer to design a small sensor board with the following specifications: Size: - The desired size of the sensor board is small, less than 5cm x 5cm. Purpose: - The primary purpose of the sensor board is data logging of GPS nd mems IMU togather on GPS timestamp Power source: - The sensor board will be using a battery as the power source. Skills and Experience: - Experience in sensor board design and miniaturization. - Proficiency in data logging and storage. - Familiarity with battery-powered devices and power management. - Knowledge of GPS and MEMS technology is preferred. The ideal freelancer for this project should have a strong background in electrical engineering and experience in designing compact and efficie...

    $304 (Avg Bid)
    $304 Oferta medie
    11 oferte

    Main Description We need an Android app that manages bluetooth gyroscope sensors and can record two groups of 3 space coordinates (x,y,z). The app has to retrieve these coordinates from two of these sensors. The FULL DETAILED PROJECT is readable here:

    $2701 (Avg Bid)
    $2701 Oferta medie
    107 oferte

    ...Garmin API for wearables and also Garmin SDK for wearables. I need you to know and be familiar with this in order for me to be comfortable giving you the project requirements. The task is to: - Integrate with Garmin API to pull specific measures of data from the system (Sleep Patterns, Steps, Exercise Routines, HVR etc. - Integrate with Garmin SDK to pull specific health measures - Live Gyroscope, Heart Rate, and Respiratory Rate. - Take this data in real time from an REACT App (core structure built - you will need to independently review GitHub code to familiarise yourself, and then built upon it to pull data) You Will Need: - Demonstratable Understanding and Experience of Garmin SDK (Monkey C) and Garmin API. - Either own or have access to a Garmin Venu 2 watc...

    $2842 (Avg Bid)
    $2842 Oferta medie
    62 oferte

    ...com/p/Milwaukee-M18-18-Volt-Lithium-Ion-High-Output-Battery-Pack-6-0Ah-48-11-1865/305081948 and to operate like a mobile phone the above links are good launch points. at no point should the device itself be altered to have a screen or a gyroscope, or anything fancy. the end goal is to have a mobile rotary phone, that functions solely as a phone and nothing else. no bells no whistles, just a rotary phone that is portable. and functional would be great as well. Skills and experience needed: - Strong knowledge and understanding of electrical schematics and components - Experience in modifying and updating electrical schematics - Ability

    $140 (Avg Bid)
    $140 Oferta medie
    11 oferte

    ...project is to make a Rpi CM4 based carrier board controlled by Tuya IoT & Home assistant. A electrical circuit has been made for CM4. This schematic is 100% finished in EasyEDA by me however Im totally uncertain if my schematic or connections are correct or not. The carrier board interfaces the following: 2x RPi Cam Module v3 1x DC motor (24V 2A) DRV8874 4x proximity sensors 1x Microphone (IS2 MEMS) 1 Amplifier + Speaker Some press buttons 1x Micro-USB connection (I would prefer to change this to USB-C) 40 GPio pin header for testing purposes Once it is done and the PCB assembled I wish to use the Tuya firmware and design a nice Tuya Ui (panel) for this device. * I need someone to confirm if the schematic is fully working and no missconnections, everything is connected w...

    $420 (Avg Bid)
    $420 Oferta medie
    29 oferte

    Here’s the description: Micromechanical acceleration sensors are widespread used for example in mobile phones. Unfortunately they give not absolute speed or displacement signals but only acceleration information. For sensing location change we need a two-fold integration of the output. Noise in that sensor falsifies the resulting output extremely. In order to get some good estimates for the distance we have process this information with an algorithm called “Kalman Filter”. The algorithm was used by the way also during the Apollo Moon Mission to shot the capsule right to the moon and back to earth. Using a powerful evaluation platform for running a Kalman-Filter gives us the chance to collect and process the data and transfer the data using a Bluetooth protocol for exampl...

    $222 (Avg Bid)
    $222 Oferta medie
    45 oferte

    I am looking for a skilled Python developer who can create a script to estimate velocity and position using the Extended Kalman's Filter. Velocity and position should be respect to earth's frame. I have data collected from a dk42688 9-DoF IMU . data is attached below. the data collected is in the following order: - Time (uS) - Accelerometer (g) - Gyroscope (dps) - Magnetometer (uT) - quaternion - linear acceleration (m/s^2): respect to sensor's frame The project requirements are as follows: Expected Accuracy Requirement: - The estimation must be of high accuracy. Data Set: - I will provide the specific data set to be used for the script. Deadline: - There is a strict deadline for the completion of the script. Ideal Skills and Experience: - Proficiency in Python p...

    $48 (Avg Bid)
    $48 Oferta medie
    14 oferte

    Thermal MEMS Actuator Theoretical Calculations I am looking for a freelancer who can provide theoretical calculations for a thermal MEMS actuator. The actuator should be capable of producing deflection. Skills and experience required: - Expertise in MEMS actuator design and analysis - Strong knowledge of thermal actuation principles and theories - Proficiency in theoretical modeling and calculations Project deliverables: - Theoretical model for the thermal MEMS actuator - Calculations and analysis of the actuator's deflection capabilities Please note that this project only requires theoretical calculations and does not involve simulation.

    $133 (Avg Bid)
    $133 Oferta medie
    19 oferte

    Modify The MEM criteria for MEM are defined as Merchant Employee Members MEMs are: Employees of the Merchant All other contacts are Clients Suppliers of the Merchant Clients of the Merchants Customer employees Anyone wanting to contact the Merchant All MEM applications are approved by the Administrator or an Admin. The Administrator is invoiced $10.00 for each MEM and each client by WebPicID. An MEM must verify their identity the new MEM the first time that they log on The Clients must verify their identity to WebPicID and the Mem must Act as an agent for WebPicID and Affirm that the information on id documents match the information provided to WebPicID. The Mem is credited with $5.0 for acting as an Agent for WebPicID.

    $13 (Avg Bid)
    $13 Oferta medie
    9 oferte
    COMSOL Acoustic MEMS S-a încheiat left

    COMSOL Acoustic MEMS - I am looking for expertise and knowledge in COMSOL Acoustic MEMS design and simulation. I have specific design parameters and specifications for the MEMS device that I would like to be met. I have attached a comparable draft example file for your kind review. You have to produce figures (no 6, 8, 9, 10, 11, 12, 13) similar to what has been done in the attached document. The Freelancer should have excellent knowledge of acoustic performance optimization, design and simulation techniques, as well as, a good understanding of MEMS fabrication techniques. The successful completion of this project will require great precision and mastery of COMSOL software. Therefore, I need a reliable and experienced Freelancer who has the ability to achieve ...

    $110 (Avg Bid)
    $110 Oferta medie
    9 oferte
    3D design a wingsuit. S-a încheiat left

    ...bird’s wings would, efficiently and smoothly. It should have 2 motors that are realistic and big enough.(please mind that I need to wings to fold, so please design it so that it doesn’t damage the motor, or it will mess with the game physics). The motors should also have propellers, you can put any type that you like, eg: toroidal, normal, etc. Lastly, please make it so that the motors are in a gyroscope like thing, 3 omnidirectional rings that support the motor and axels so that the rings can turn the motor in any direction. I want my game to be as realistic as possible. So I want all these details to be included. Thank you. Specific requirements include: - High level of realism with intricate details - Incorporation of a specific design that I have in mind...

    $20 (Avg Bid)
    $20 Oferta medie
    5 oferte
    Design a pcb for esp32 S-a încheiat left

    ...large-sized PCB (greater than 10cm x 10cm) for an ESP32 project. Key Requirements: - Experience in designing large-sized PCBs - Proficiency in Altium Designer, as it is the preferred PCB layout software - Ability to suggest and incorporate specific components into the design Tasks: - Create a PCB layout that accommodates the ESP32 SoC not the module. - The PCB should contain an accelerometer and gyroscope module. - Power to the board will be feed from an RJ45 PoE cable. The same cable will be used for modbus tcp so all additional hardware for that will need to be implemented. - The board will need to be programed using the Arduino IDE and other specific components - Provide suggestions for some components that are not yet specified - Ensure that the PCB design meets the desi...

    $20 / hr (Avg Bid)
    $20 / hr Oferta medie
    30 oferte

    ...clock is generated internally from a PLL, locked to the PPS. Lattice ECP5 on a custom board There are 2 external interfaces to an IMx6 SPIM: Spi Slave, the Master is a Imx6 processor, which is used to write and read internal registers and ADC’s registers. Details on the protocol in the FDD SPIS: Si Master, the data acquired from the ADCs are packed and sent to the external IMx6 Modifications ADD MEMS Accelerometer, ADXL355 channel modify the data stream, adding 8th channel. A review of protocol might be needed ADD Registers to control DAC and discretes ADD DAC. We can share a DDS to generate arbitrary waveforms, sine and pulses Connect some LED to internal registers controlled by SW Other activities Test and debug on a custom board with a iMX6 connected. the iMX6 will not...

    $452 (Avg Bid)
    $452 Oferta medie
    19 oferte

    I am looking for a freelancer who can develop a hardware sensor for movement tracking. The specific type of movement tracking required is gyroscope or other tracking. The sensor will be integrated into a new system, not an existing one. The expected range of movement that the sensor will need to track is small scale, such as a handheld device. Skills and experience required for this project: - Strong knowledge and experience in developing hardware sensors for movement tracking - Expertise in gyroscope tracking technology - Ability to integrate the sensor into a new system - Familiarity with small-scale movement tracking, such as handheld devices If you have the necessary skills and experience, please submit your proposal for this project.

    $428 (Avg Bid)
    $428 Oferta medie
    30 oferte

    Description: Are you ready to take quadcopter technology to the next level? We are seeking a skilled MATLAB expert to work on an exciting project that involves integrating sensors and conducting projection angle analysis on a quadcopter model. In this project, you will be tasked with: 1. Integrating an accelerometer and a gyroscope on two separate actuators of a quadcopter model. 2. Comparing the projection angles/lines obtained from the different sensor setups to identify any variations. Skills Required: - Proficiency in matlab - Experience with sensor data integration and analysis - Knowledge of quadcopter dynamics and control systems - Strong understanding of sensor technologies (accelerometers, gyroscopes) - Data processing and analysis expertise Experience: Applicants shou...

    $91 (Avg Bid)
    $91 Oferta medie
    10 oferte

    ...will enhance the AR experience. Subtle, soothing sounds will accompany different interactions, such as gentle puzzle piece movements, soft chimes, and nature whispers. Technical Specifications: The AR functionality will be implemented using a suitable AR development platform, such as ARKit (iOS) or ARCore (Android). The website will detect and utilize the device's camera, gyroscope, and touch inputs to create the interactive AR effects. Animation sequences, 3D models, and holographic elements will be optimized for smooth performance and accurate tracking on various devices. Required Skills: To excel in this project, you should possess the following skills: Augmented Reality (AR) Development: Proven expertise in AR development, utilizing ...

    $1067 (Avg Bid)
    $1067 Oferta medie
    11 oferte

    ...development by seeing if there is an experienced developer that has done Garmin integration before. Please don't apply if you do not have this experience that you can refer to. The specific wearable is the Garmin Venu 2 Plus. You will leverage the SDK and the API separately to pull out: - Live heart rate, Heart Rate Variability, and respiratory rate (this requires SDK which we can provide) - Live Gyroscope and Accelerometer data when required (Can turn on and off at the app level - will require SDK) - Connect through the API to collect: * Sleep Data from API (REM, Normal etc) and time of sleep.   * Need to pull data on whether the device is online and connected (watch to phone and phone to network).  * Last Contacted (Perhaps ever 10 minutes) * Need t...

    $1508 (Avg Bid)
    $1508 Oferta medie
    28 oferte

    ...drive vehicle robot for agricultural purpose, I need "Embedded c" or "Arduino" base coding engineer, who can help to do "embedded C" coding of requirements, interfacing sensor code , software requirement testing etc . Person should have worked on, Analog and digital inputs and outputs, should know about PWM ,and current controlled outputs should be enthusiastic to work upon sensors like RPM, Gyroscope and more. Person should be good in understanding and making, simple electronics circuits ( like PULLUP/PULL DOWN circuit, Switch control or capacitor filter circuits etc) person will be responsible for: 1. Sensor integration and coding and testing 2. Requirement Implementation for robots 3. perform module level and integration level testing 4. mai...

    $101 (Avg Bid)
    $101 Oferta medie
    13 oferte

    I am looking for a freelancer who can help me establish an I2C connection between an ICM20948 accelerometer and an STM32 microcontroller. Purpose of the I2C connection: - The main purpose of establishing this I2C connection is to enable communication with other devices. Type of ICM20948: - The ICM20948 used in this project is an accelerometer, gyroscope and magnetometer. Communication protocol: - The I2C communication protocol is used for this I2C connection. Ideal skills and experience: - Proficiency in STM32 programming and I2C communication protocol implementation - Experience with accelerometer sensors, specifically the ICM20948 - Knowledge of data logging and sensor fusion techniques - Ability to troubleshoot and debug I2C communication issues - Strong probl...

    $103 (Avg Bid)
    $103 Oferta medie
    28 oferte
    Drone PCB design S-a încheiat left

    Smart Drone 6-axis gyroscope, pcb board. I need a professional EE that can create a custom pcb board for an educational drone. This drone should be able to have rechargeable battery, Bluetooth, and wifi connectivity. This drone will be connected with an app to do custom controls. I will attach reference pictures of a similar competitor drone.

    $496 (Avg Bid)
    $496 Oferta medie
    34 oferte

    I have IMU sensor icm20948 and Huzzah32 feather that has built in Bluetooth. The device reading data form sensor ( acceleration and gyroscope data successfully ) I want to send these data to ( txt file ) locally. - creating python file or matlab to send the data /reading offline using Bluetooth - update the ardunio code to send the data via Bluetooth.

    $42 (Avg Bid)
    $42 Oferta medie
    25 oferte
    Nordic nRF52 PDM S-a încheiat left

    ...nRF52 PDM Microphone Project I am seeking a software developer who can assist me in developing a Nordic nRF52 PDM microphone. The microphone should measure sound level in dB. Ideal Skills and Experience: - Proficiency in software development for Nordic nRF52 in KEIL with SDK by Nordic It is necessary to implement the code for the microcontroller in C . It is necessary to receive data from the MEMS microphone MMICT390200012 via the PDM interface. Microcontroller Nordic nRF52832. ARM KEIL development environment. The environment is already configured and there is a project. The official SDK from Nordic nRF5_SDK_17.1.0_ddde560 is used. All peripherals, UART for debugging are also configured. PCBA is factory produciton. Scheme in the attachment Algorithm: Set up the PDM interface...

    $123 (Avg Bid)
    $123 Oferta medie
    13 oferte

    ...every 30 seconds, so the purpose of making this app is to collect sensors data which are accelerometer sensor(also portrait or landscape), gyroscope sensor(also portrait or landscape)and magnetometer and GPS Coordinates like - Speed, Longitude and Latitude information, and there should be one button on the app, from where I can export the file in CSV format, and also one text box from which I can type the label like walk,car,bus, etc , and I want that label on CSV file with a new column called as “target” The CSV would look like this Updated Data Timestamp Longitude Latitude Speed GyroscopeX(Gyroscope sensor) GyroscopeY(Gyroscope sensor) GyroscopeZ(Gyroscope sensor) GyroscopeOriention(like potrait or landscape) AccelarationX(Accelarometer sens...

    $173 (Avg Bid)
    $173 Oferta medie
    12 oferte

    - Explore and use COMSOL Multiphysics software to investigate the surface micromachined MEMS resonator as part of a micromechanical filter with and without an applied DC bias - Deformation of the resonator under different bias conditions. - Investigate the effect of using different parameters on the displacement of the resonator

    $12 (Avg Bid)
    $12 Oferta medie
    11 oferte

    ...nRF52 PDM Microphone Project I am seeking a software developer who can assist me in developing a Nordic nRF52 PDM microphone. The microphone should measure sound level in dB. Ideal Skills and Experience: - Proficiency in software development for Nordic nRF52 in KEIL with SDK by Nordic It is necessary to implement the code for the microcontroller in C . It is necessary to receive data from the MEMS microphone MMICT390200012 via the PDM interface. Microcontroller Nordic nRF52832. ARM KEIL development environment. The environment is already configured and there is a project. The official SDK from Nordic nRF5_SDK_17.1.0_ddde560 is used. All peripherals, UART for debugging are also configured. PCBA is factory produciton. Scheme in the attachment Algorithm: Set up the PDM interface...

    $118 (Avg Bid)
    $118 Oferta medie
    13 oferte

    I am looking for an experienced freelancer who can help me optimize the design of my MEMS Thermal Flow sensor using COMSOL simulation. The desired outcome of the simulation is to optimize the sensor's design for maximum efficiency. I have a rough idea of the design but require assistance in finalizing it. The simulation results must be of high accuracy to ensure the sensor's performance is validated. Ideal skills and experience: - Expertise in COMSOL simulation software - Experience in MEMS Thermal Flow sensor design and optimization - Strong understanding of thermal behavior - Ability to deliver high accuracy simulation results - Excellent communication skills to ensure smooth collaboration throughout the project.

    $107 (Avg Bid)
    $107 Oferta medie
    16 oferte

    Looking for a software programmer to connect a custom virtual instrument using...to connect a custom virtual instrument using OSC or MIDI to with traditional DAWS (Logic Pro X). We are going to develop the wearable music glove as the controller (tapping on fingers and hand gestures) and need your assistance to create the connection between the controller and the DAW. About the glove: a fully functional glove capable of connecting to the communication bridge and delivering gyroscope data to it. The communication bridge (probably based on a Raspberry Pi computer and a router). The prototype Glove will have to be adjusted to work with the MIDI controller (DAW). Kindly respond with a proposal that shows what is possible with your programming and the type of features that you are able to...

    $43 / hr (Avg Bid)
    $43 / hr Oferta medie
    2 oferte

    I need a consultation and explanation of how to build a MATLAB system to control two servos using gyroscope and control joystick

    $93 (Avg Bid)
    $93 Oferta medie
    26 oferte