Siemens nxproiecte

Angajam automatist sau echipa de 2-3 automatisti pentru proiecte de automatizare care controleaza sisteme de conveioare. SCHNEIDER in principal sau SIEMENS. Oferim intre 1000 Euro si 20000 Euro in functie de complexitatea si dimensiunea proiectului, precum si de tipurile de sarcini indeplinite: : PROIECTARE: solutie (layout electric), proiectare scheme monofilar, scheme electrice, tablouri electrice, EXECUTIE: tablouri, cablare pe solutia mecanica si legaturi in vederea testarii PROGRAMARE: software PLC, HMI, SCADA etc MANUALE DE OPERARE TESTARE de tip FAT: running and testing la fabrica producator COMMISSIONING si PIF la sediul clientului (Romania, Spania, Franta, Grecia, Anglia, tari din Middle East, Africa, India, America de Sud). Pentru mai multe detalii va stam la dispozitie.

Reprezentam una dintre companiile de succes pe piata automatizarilor din Romania. Suntem in cautarea unui Programator cu experienta solida in programare Siemens Simatic S7 si/ sau Beckhoff , cu studii superioare de specialitate (automatica, mecatronica , electronica) si cunostinte avansate de limba engleza sau germana. Oferim un mediu de lucru profesionist si sanse reale de dezvoltare profesionala.

Reprezentam una dintre companiile de succes pe piata automatizarilor din Romania. Suntem in cautarea unui Programator cu experienta solida in programare Siemens Simatic S7 si/ sau Beckhoff , cu studii superioare de specialitate (automatica, mecatronica , electronica) si cunostinte avansate de limba engleza sau germana. Oferim un mediu de lucru profesionist si sanse reale de dezvoltare profesionala.

I need a precise 3D CAD model of a putter...cover overall length, taper profile, cap diameter, and the core bore, so your task is to translate those numbers faithfully into the digital model. Tolerances should hold to ±0.2 mm or better. I’m open to suggestions on subtle alignment aids, surface textures, or even integrating a simple logo, but the primary requirement is to match my specs exactly. Preferred tools are SolidWorks, Fusion 360, NX, or any mainstream CAD platform that exports a rock-solid .STEP file. Deliverables • Final .STEP file that meets all supplied dimensions • Native CAD file for future edits • Quick 2-D dimensioned drawing (PDF) so I can double-check before sign-off Once everything checks out against my measurements, I’ll re...

I have a Siemens LOGO PLC on my network that speaks Modbus-TCP and I need a clean, well-commented Python script that can both read from and write to its registers using the pyModbusTCP (or compatible) library. The goal is to end up with a small module I can drop into a larger project, so clarity and reliability matter more than flashy UI. Here’s what I expect: • A single .py file that opens the connection to the LOGO (IP, port and slave ID must be easily configurable at the top of the script). • Functions I can call for typical tasks: read_coils, read_holding_registers, write_single_coil, write_single_register (or their pyModbusTCP equivalents). • An example section (under if __name__ == "__main__": ) that demonstrates the above functions in ac...

Trabajo con un PLC Siemens S7-1500 y necesito completar la programación de control y monitoreo de la maquinaria en TIA Portal V19, junto con la configuración de su interfaz HMI. El código base ya está creado, pero deben afinarse las rutinas de control, optimizar los bloques de datos y diseñar pantallas que muestren estados, alarmas y tendencias en tiempo real; todo debe quedar documentado en español. Para que el proyecto quede cerrado satisfactoriamente requiero: • Archivo completo de TIA Portal V19 con programa PLC y proyecto HMI. • Pantallas HMI operativas y enlazadas a las variables del S7-1500. • Instrucciones de puesta en marcha y respaldo (PDF y comentarios in-code). • Sesión remota de prueba y aju...

...internal features that a production-ready shell would require. Although I’m supplying only images, accuracy is essential; dimensions must feel production-grade so the file can go straight to engineering for review. Surface quality, parting lines and filleting should reflect real-world manufacturability for plastic body panels (injection or vacuum-formed). You’re free to use SolidWorks, CATIA, Siemens NX, Fusion 360 or any other professional CAD platform as long as the final export opens flawlessly in STEP AP214/AP242. Please maintain a fully parametric tree so future edits remain possible. Acceptance criteria • STEP file imports without errors • Visual match to reference images from all viewpoints • Consistent wall thickness and assembly...

...in Industrial Automation capable of delivering an advanced module on LADDER and GRAFCET programming exclusively within the Siemens environment. My group of trainees already masters the basics; therefore, I want to go straight to complex topics and professional best practices. Module Objectives - Deepen LADDER/GRAFCET programming in TIA Portal with a focus on S7-300/400 or S7-1200/1500. - Implement a complete production line simulation to illustrate transitions, sequences, and interlocks. - Provide corrected exercises including fault finding, online diagnostics, and cycle optimization. Concrete Expectations - Prepare clear course materials (slides + Siemens project files). - Deliver a realistic simulation scenario (virtual object or digital twin) showing conve...

I have an Arduino Opta PLC that must act as the Modbus RTU master for two drives—a Siemens SINAMICS V20 and a Power Electronics VFD. The goal is simple: a user touches a Cloud- Arduino touchscreen, enters a ratio such as 30 : 70, presses “Run,” and the PLC then runs each VFD for the correct proportional time slice before repeating or stopping as configured. What I need from you • Ladder-logic code written in the Arduino PLC IDE that handles Modbus polling, ratio calculation, timing, and safe start/stop sequences for both drives. • A detailed step-by-step guide (screenshots encouraged) covering wiring, RS-485 settings, drive parameter maps, code deployment, and how to expand or tweak the timing logic later. Acceptance will be based on: 1. The Opta...

... and equivalent to paper records and handwritten signatures. Key principles include: • Data integrity (ALCOA+ principles) • Secure user authentication • Audit trails • System validation • Controlled access • Record retention and retrieval ________________________________________ 3. System Architecture Overview 3.1 High-Level Architecture The system typically consists of: • PLC Hardware (e.g., Siemens, Allen-Bradley, Schneider) • PLC Communication Layer (OPC UA, Modbus TCP, Ethernet/IP, Profinet, etc.) • SCADA / Custom Application Software • Application Server (business logic, audit trail, security) • Database Server (electronic records and audit logs) • Client Interface (HMI/Web/Desktop application) 3.2 Data Flow • ...

I have a new Siemens PCS7 distributed control system that needs to go from boxes on the floor to a fully running plant-wide platform. All hardware is on-site; what I’m missing is the hands-on expertise to get everything installed, wired, integrated, and then programmed. Here’s the scope I need covered: • Complete the initial installation of all PCS7 hardware: rack assembly, I/O cards, network components, and field cabling. • Integrate the controllers, servers, and engineering stations so the entire DCS communicates cleanly. • Develop the required PCS7 project: create CFC/CC blocks, configure WinCC graphics, implement interlocks and sequences, and load the code to the controllers. Acceptance will be a running system that passes a short FAT with no cr...

I have an existing STL from 3D Scan data of vehicle bodywork that I now need rebuilt as clean, wat...captures the shape, but I expect a professional resurfacing job: moderate detail with a few complex transitions, proper curvature continuity, and no unnecessary patchwork. Please keep fillet radii and panel gaps faithful to the original file while removing the typical faceted look of an STL. Deliverables: • Native surface model in your preferred CAD package (SolidWorks, Rhino, Fusion 360, Siemens NX, or equivalent) • Neutral STEP or IGES export that opens error-free • Brief note on any areas that required interpretation or smoothing beyond the mesh itself Before we start, I will share the STL and a couple of reference screenshots so you can confirm f...

...in Industrial Automation capable of delivering an advanced module on LADDER and GRAFCET programming exclusively within the Siemens environment. My group of trainees already masters the basics; therefore, I want to go straight to complex topics and professional best practices. Module Objectives - Deepen LADDER/GRAFCET programming in TIA Portal with a focus on S7-300/400 or S7-1200/1500. - Implement a complete production line simulation to illustrate transitions, sequences, and interlocks. - Provide corrected exercises including fault finding, online diagnostics, and cycle optimization. Concrete Expectations - Prepare clear course materials (slides + Siemens project files). - Deliver a realistic simulation scenario (virtual object or digital twin) showing conve...

...un module avancé de programmation LADDER et GRAFCET exclusivement sur l’environnement Siemens. Mon groupe d’apprenants maîtrise déjà les bases ; je veux donc aller droit aux sujets complexes et aux bonnes pratiques professionnelles. Objectifs du module • Approfondir la programmation LADDER/GRAFCET sur TIA Portal avec un focus S7-300/400 ou S7-1200/1500. • Mettre en place une simulation complète de chaîne de production afin d’illustrer les transitions, séquences et interverrouillages. • Proposer des exercices corrigés incluant la recherche de pannes, le diagnostic en ligne et l’optimisation de cycles. Attentes concrètes – Préparer un support de cours cla...

More details: What functionality should the program control on the NX technologies E8150 traction inverter- Speed control, Temperature monitoring Should the program include any safety features? Emergency stop, Fault diagnostics What level of automation is required for the program? Semi-automated control

...recipe management system using a MySQL backend. The system will interface with a Siemens S7-1510SP PLC (TIA Portal V19). The project involves 6 products sharing one database, where only one product runs at a time. Key Features Required: -Color Selection UI: A visual palette where users pick a color to capture its Hex ID as the database key. -Recipe Management (CRUD): Ability to Create, Save, View, and Edit recipes. Each recipe contains a 23-row matrix of temperature/VLT data. -Interlock Logic: Only one of the 6 products can be in "RUN" mode at a time. Running recipes must be locked from editing or deletion. -PLC Data Handshake: On "Start," Ignition must send only one specific row from the 23-row matrix to the Siemens PLC. Testing & Hardware: -Har...

I need to program a PLC to replace failed control boards on hydraulic column lifts for vehicles. Requirements: - Help in selecting the right PLC - Program PLC to make lifts functional Ideal skills and experience: - Experience with Siemens, Allen Bradley, or Mitsubishi PLCs - Knowledge in programming PLCs for hydraulic systems - Background in industrial automation - Familiarity with safety protocols and remote monitoring (a plus) Please provide relevant experience in your bids.

...work well on: Business cards Clothing Social media Website Must be supplied in: Vector format (AI, SVG or EPS) Transparent background versions BUSINESS CARD CONTENT Front Logo Tom Gee Automation & Industrial Engineering Contractor +44 7833 430 838 Instagram = BluePeakEngUK Email - Leave empty not made one yet i can fill in myself Services (clean, professional wording) PLC Programming (Siemens TIA Portal & Step 7) PLC Modifications & Optimisation Commissioning & Site Start-Up Factory Acceptance Testing (FAT) Control Panel Testing & Pre-Site Software Installation Industrial Electrical Installations Electrical Fault Finding Mechanical Installation & Integration TIG Welding & Fabrication Design should be clean, modern, and easy to read...

I need a concise but technically rigorous study that determines whether an automatic or hydro-mechanical transmission can be successfully retrofitted into legacy T-72 and T-90 main battle tanks. The heart of ...retrofit pathway. 3. Executive slide pack (10–12 slides) summarising feasibility findings for senior decision-makers. I’ll shortlist freelancers who can show past work on heavy-vehicle powertrain integration, especially those comfortable with drivetrain FEA, CFD for oil cooling, and MIL-STD documentation. Share one or two relevant projects and note which CAD/CAE tools you’ll use—CATIA, Creo, NX, Abaqus, Ansys, etc. I’m aiming for an initial concept review in six weeks, so outline your milestones and how you’ll keep the communicat...

...transition from hand-sketch to a complete, manufacturable 3D model. The project is strictly product design for manufacturing, so every decision—from wall thickness to draft angles—has to respect real-world production constraints. You’ll start with my sketches, functional notes and target materials, then develop a clean parametric model in the CAD platform you know best (SolidWorks, Fusion 360, Creo, NX—your choice as long as STEP export is flawless). I expect collaborative iteration: we’ll review geometry, address DFM tweaks, and lock dimensions before drawings are released. Deliverables • Native CAD files of all parts and assemblies • STEP and STL exports ready for CNC & injection moulding • Fully dimensioned 2D/ 3Ddrawing...

Our production line runs on a Siemens PLC that exchanges data with several devices over Ethernet/IP. Lately we keep getting random communication errors that halt the process, yet a simple reboot clears the fault—until it reappears. I need an engineer who knows Siemens hardware and TIA Portal inside-out to pinpoint the root cause, correct the PLC logic or network configuration, and make the problem disappear for good. Here’s exactly what I’m after: • Investigate the communication faults and identify their source, whether it’s in the PLC code, the Ethernet/IP setup, or an external device. • Implement and test the required logic or configuration changes to restore reliable operation. • Supply a brief change log and a tidy set of note...

I have a set of technical drawings in PDF format that I need rebuilt as clean STEP and IGS files. The job calls only for the basic structural geometry—no textures, surface finishes, or embedded annotations—yet the models must still respect ISO requirements for naming, units, and layer conventions. You are free to work in SolidWorks, Inventor, NX, or any other mainstream CAD package, as long as the exported STEP (.stp) and IGES (.igs) files open error-free in common viewers. Deliverables • One STEP and one IGS file for each drawing supplied • Source CAD files (so I can make future edits) Acceptance checks • Geometry matches the provided PDFs within ISO-toleranced dimensions • Files import without healing in SolidWorks and FreeCAD &bu...

I have a small lab bench running a Siemens PLC and an Ignition Edge Gateway that still sits on the default settings. I need a programmer who already knows their way around Ignition Edge to turn this blank slate into a working demo environment. Your first task is to configure the gateway itself—licence activation, tag provider, security zones and the usual Edge limitations—so that the PLC’s tags are browsed and exposed cleanly. From there we’ll move straight into scripting and logic: I want lightweight Python scripts inside Ignition to handle calculated tags and to trigger events when certain states occur. Two key features must be delivered: • Robust data-logging of selected PLC tags to the built-in store-and-forward buffer so I can pull historica...

Título del Anuncio: Integrador Industrial - PLC Siemens S7-1200 / RS485 / Node-RED ​Descripción del Proyecto ​Buscamos un experto en automatización industrial para la puesta en marcha de un sistema de monitorización hídrica y meteorológica en un centro educativo. El objetivo es conectar hardware físico y centralizar los datos en un panel de control (Dashboard) técnico. ​El freelance trabajará sobre una base ya existente de Node-RED que mide variables eléctricas. ​ Tareas a realizar: - ​Integración Meteorológica: Configuración de estación Senscap s1000 v2 vía RS485 mediante conversor TCP/IP. Lectura de registros Modbus en Node-RED. ​ - Programación PLC (TIA Portal v16/19):...

More details: Is this project for business or personal use? For starting a new enterprise What information should successful freelancers include in their application? Experience How soon do you need your project completed? ASAP

...return them for the next drilling or pressing stroke—all without human touch. To make this happen I need a mechanical designer who can deliver a fully functional 3D working model in Siemens NX. What I’ll hand over • Machine envelopes, stroke data and a rough sequence of operations. • Preferred actuators and any existing part geometry. What you’ll create • A clean, parametric NX assembly of the entire mechanism, including linkages, grippers, slides and guards. • Motion simulation of one complete cycle covering both material-handling and assembly operations, with collision-free verification. • Native NX files plus STEP for sharing with my fabrication vendor. Acceptance criteria • The simulat...

...rather than speculative. Roles we still need to fill (4+ yrs exp each) System architects, embedded and systems programmers, verification engineers, physical design specialists, DevOps for CI/CD of RTL builds, HR lead for technical hiring, tech managers and team leads. Solid command of SystemVerilog/VHDL, C/C++, Linux kernel or Yocto, scripting, and modern EDA toolchains (Synopsys, Cadence, Siemens) is expected. What to include in your application Show me clear evidence of relevant experience—projects you’ve taken from spec to silicon or to FPGA prototypes, particularly for computing devices. Mention any industry connections (fabs, EDA vendors, IP houses) you can bring; they matter. Key acceptance criteria • Architecture spec frozen within 60 days of team...

...rather than speculative. Roles we still need to fill (4+ yrs exp each) System architects, embedded and systems programmers, verification engineers, physical design specialists, DevOps for CI/CD of RTL builds, HR lead for technical hiring, tech managers and team leads. Solid command of SystemVerilog/VHDL, C/C++, Linux kernel or Yocto, scripting, and modern EDA toolchains (Synopsys, Cadence, Siemens) is expected. What to include in your application Show me clear evidence of relevant experience—projects you’ve taken from spec to silicon or to FPGA prototypes, particularly for computing devices. Mention any industry connections (fabs, EDA vendors, IP houses) you can bring; they matter. Key acceptance criteria • Architecture spec frozen within 60 days of team...

...a production-ready SIAPP container that runs on the Siemens SICAM A8000 platform and acts as an MQTT client. The container must connect to a MQTT broker, read the A8000’s configured digital inputs, analog inputs and status signals, publish those values, and in the opposite direction subscribe to topics carrying status updates and control commands so the payloads can be written straight back into the matching SICAM signals. The work involves building the application on embedded Linux, packaging it as a SIAPP, and verifying it on real demo hardware. Clean logging, reconnect logic, and graceful handling of network interruptions are essential, as this will be deployed in an operational substation environment. SDK: Deliverables • Compiled SIAPP image with all

I need a production-ready STP file for a functional silicone microwave cleaner that will sit comfortably in a standard-size bowl (about 5–6 oz of water or vinegar... • Deliver an editable STP that the factory can tool directly. • Iterate with me, the licensor, and the factory until PPS samples are signed off. Minor tweaks for gate locations or material flow are part of the brief. • Supply strength/temperature simulations or hand-calcs that justify wall transitions and vent sizing so QA can approve the design with confidence. Tool keywords: SolidWorks, NX, MoldFlow (or equivalent), food-grade silicone design. Timeline is flexible enough for proper DFM, but I’d like first visuals within a week. Let’s create something that cleans a microwave bril...

I need a complete CAD design for an ...wall-thickness guidelines for thermoformed or injection-moulded substrates, and leave clean routing paths for the wiring that will power the integrated lighting. I will supply reference dimensions and a rough package drawing of the vehicle’s roof once we agree to start; you will turn these into a fully detailed 3D model ready for tooling. Please use a mainstream parametric package—SolidWorks, CATIA, NX or similar—so I can edit it later. Your hand-off should include the native file plus a neutral STEP file and a PDF drawing that highlights critical sections, screw boss locations and clip geometry. To be considered, show me a sample of an interior panel or headliner you have modelled before and briefly outline the software...

I need the existing ladder logic and routines that currently run on an AB Rockwell CompactLogix controller rewritten for a Siemens S7-1200. This program drives an industrial automation line, so the converted code must replicate every sequence, interlock, and fault routine without functional drift. The new project has to integrate seamlessly with Ethernet/IP, PROFINET, and Modbus devices already on the plant network. I will supply the original RSLogix 5000 project file, tag list, and any add-on instructions; you return a fully tested TIA Portal project that mirrors the original HMI tags and produces identical machine behaviour. Deliverables • TIA Portal v17 (or newer) project containing the complete S7-1200 program • Updated tag list matching original naming where...

...Phase 2 of our large-scale automation program and are ready to push our production line well beyond its current throughput. The scope here is sharply focused on production line optimization with one clear goal: substantially increase output speed by refining the performance of our robotic arms. Current environment • Multiple six-axis industrial robots (FANUC and ABB) coordinated through a Siemens PLC and a central SCADA layer. • On-prem edge servers running ROS2, real-time EtherCAT, and a custom Python/C++ scheduling service. What I need in this phase 1. Motion-planning logic that minimizes dwell time and overlap conflicts between adjacent robots. 2. A software integration layer—ROS2 or comparable middleware—that feeds live telemetry into the P...

...Phase 2 of our large-scale automation program and are ready to push our production line well beyond its current throughput. The scope here is sharply focused on production line optimization with one clear goal: substantially increase output speed by refining the performance of our robotic arms. Current environment • Multiple six-axis industrial robots (FANUC and ABB) coordinated through a Siemens PLC and a central SCADA layer. • On-prem edge servers running ROS2, real-time EtherCAT, and a custom Python/C++ scheduling service. What I need in this phase 1. Motion-planning logic that minimizes dwell time and overlap conflicts between adjacent robots. 2. A software integration layer—ROS2 or comparable middleware—that feeds live telemetry into the P...

...parameters, faults, or performance metrics) - Testing and verification of changes - Providing a brief handover/report to our team and the customer - Working safely in an industrial environment and complying with site health & safety requirements Required Skills and Experience: - Proven experience with servo drive systems (tuning, parameter configuration, fault diagnosis) – brands such as Siemens, Allen-Bradley, Bosch Rexroth, Yaskawa, or similar highly desirable - Strong background in industrial control panels, PLCs, HMIs, and motion control - Hands-on commissioning and troubleshooting experience on customer sites - Proficiency with relevant software/tools for drive configuration and data logging - Ability to work independently and communicate effectively wit...

Trabajo a diario con TIA Portal para PLC S7-1200, S7-300 y S7-1500 y voy a necesitar ayuda de forma continua, siempre en modo offline. Las tareas que irán apareciendo son breves pero...con un registro claro de cambios y los bloques comentados. No trabajo con un ritmo de emergencia; podemos fijar plazos cómodos, pero una vez acordados deben cumplirse. El flujo típico será: 1) descripción corta de la tarea y alcance, 2) entrega de la versión modificada, 3) revisión conjunta (máximo dos ajustes menores) y 4) cierre y siguiente encargo. Si manejas bien las librerías estándar de Siemens, las funciones de diagnóstico del propio TIA Portal y PLCSim para pruebas, tendremos una colaboración fluida. Compart...

I’m ready to deepen my skills in Siemens Desigo, but I want to focus exclusively on system programming rather than installation or basic troubleshooting. I already work with building management systems, so you won’t need to start from absolute zero—I’m looking for someone who can help me translate that existing knowledge into solid, hands-on Desigo programming expertise. Here’s what I have in mind: • A concise learning path that starts with Desigo’s programming environment, then moves into creating and deploying real strategies, scripts, and logic blocks. • Live, screen-shared sessions (or well-recorded videos) where I can see each step clearly, ask questions, and get instant feedback. • Small practical assignments after each ...

I want to upgrade my drone so it can automatically spot and keep track of people and animals in real time while flying over forested terrain during search-and-rescue missions. The live 4K video stream comes down from a gimbal-stabilised camera and is processed on an onboard NVIDIA Jetson Xavier NX. I need a robust deep-learning pipeline (e.g., YOLOv8 + DeepSORT/ByteTrack in PyTorch or TensorFlow) that can: • detect people and common wildlife through partial canopy cover, variable light and motion blur • maintain unique IDs as targets move in and out of view • draw bounding boxes and labels on the feed at a steady 30 fps with end-to-end latency under 200 ms The system has to fuse camera pose and GPS so each detection can be translated into lat-long coordinates,...

...manufactured. You will start with the supplied scans, rebuild the geometry so every face is accurate, and deliver the finished part as a SolidWorks .sldprt file plus a neutral STEP for cross-platform use. Please keep all critical dimensions faithful to the original mesh; an overlay that shows minimal deviation will be used as acceptance. If you normally rely on tools such as Geomagic Design X, Siemens NX or similar reverse-engineering plug-ins, feel free to put them to work—whatever gets the job done precisely. When you reply, let me know the workflow you plan to follow and the typical accuracy you achieve between mesh and final model....

...daraus ein komplettes Automatisierungsprojekt in TIA Portal erstellen lassen. Konkret brauche ich • ein funktionsfähiges Siemens-HMI-Panel, • das zugehörige Steuerungsprogramm in FUP oder S7-Graph, • sämtliche Projektdateien sauber kommentiert. Auf dem Panel soll der Prozess klar visualisiert werden: Prozess- und Statuswerte müssen angezeigt werden, alle notwendigen Bedienelemente bereitstehen und ein Alarmsystem soll Störungen sowie Meldungen nach Priorität ausgeben. Akzeptanzkriterien – Jede Stufe des übergebenen Grafcets ist im Code eindeutig abgebildet und folgt der vorgesehenen Sequenz. – Das TIA-Projekt kompiliert ohne Fehler auf einer aktuellen Siemens-Firmware-Version (bitte Ihre Version angeb...

We have already developed a SIMENS nx ADD-IN that integrates with LEO AI. We plan to add the following features: 1. Support for new features called partReplacement and assemblyInspection. These two features are very similar to existing ones, but when you click a button, you send the file path of the component to which the feature will be applied. You must save the file before sending it. To support this feature, we've added new fields called placeLikeComponentTitle and placeLikeFilePath to the NX-side API. 2. Add the ability to open STEP files. For implementation details, please refer to the updated documentation. Most of the required information is between lines 959 and 1214 (see the full documentation for more details). Key deliverables: - Complete source code - A v...

Hi, I have expertise in Various SiemensPLCs like S7-1200, S7–1500, S7-200 and i can deliver within a week. I’m available and can start from today. Regards, Sara

S7-1200 Programming, TP700 HMI for Water Treatment Project.

Skills Required Skill Category Essential Skills Technical Proficiency Proficiency in 2D/3D CAD modeling and drafting (e.g., Unigraphics-NX, SolidWorks, AutoCAD) Engineering Knowledge Strong grasp of mechanical engineering principles, automotive systems, and materials science. Manufacturing Process Understanding of manufacturing processes for plastics, sheet metal, castings, and machined parts. GD&T Expertise in Geometric Dimensioning and Tolerancing . Analysis & Testing Experience with prototype testing, validation, and Finite Element Analysis (FEA) Problem-Solving Strong analytical and troubleshooting skills to resolve design and production issues Project Management Ability to manage multiple projects, meet deadlines, and coordinate with various teams Communication ...

...manoeuvring and heavy-load conditions, so please keep hub dimensions, blade area ratio and overall diameter consistent while only the angular settings vary. A clean, watertight, fully-parametric solid is essential—edges must knit, faces must form closed volumes and the hub-to-blade transition should be filleted smoothly to avoid mesh artefacts in ANSYS. I’m comfortable if you work in SolidWorks, NX, CATIA or a similar package as long as the exported *.STEP opens without healing. Include a short PDF or embedded note showing the key dimensions, reference axes and angle definitions so I can reproduce the set-up in future. Once the files pass an import check and a quick surface mesh in ANSYS, the project is complete....

We have already developed a SIMENS nx ADD-IN that integrates with LEO AI. We plan to add the following features: 1. Support for new features called partReplacement and assemblyInspection. These two features are very similar to existing ones, but when you click a button, you send the file path of the component to which the feature will be applied. You must save the file before sending it. To support this feature, we've added new fields called placeLikeComponentTitle and placeLikeFilePath to the NX-side API. 2. Add the ability to open STEP files. For implementation details, please refer to the updated documentation. Most of the required information is between lines 959 and 1214 (see the full documentation for more details). Key deliverables: - Complete source code - A v...

I have a Siemens Siprotec 5 7VU85 that must take full control of seven circuit breakers on our switchboard. The relay’s job is strictly control-oriented: it has to issue open/close commands, capture live status indications, and perform fault-detection-and-isolation logic for each breaker. All messaging will ride on Profinet, so every dataset, logical node, and signal list has to be mapped with that protocol in mind—no IEC 61850, Modbus, or DNP3 gateways. You’ll start from a clean slate: the relay is factory-fresh and the breakers are already wired to the digital inputs/outputs. I’ll provide the I/O list, breaker addresses, and a one-line diagram; you return a tested parameter file and concise commissioning notes I can hand to the field techs. Deliverables &...

I’m looking for a seasoned offline Siemens PLC specialist to take over programming duties on one of our S7-200 systems. The basic hardware is already in place; what I need is clean, well-structured ladder logic, a refreshed operator interface, and guidance through final commissioning. You’ll start by reviewing the existing STEP 7 Micro/WIN project, the I/O list, and a concise functional description I’ll supply. From there, your job is to • expand or modify the current logic so the process sequences match our latest production requirements, • comment every network clearly, and • compile it error-free for download via PPI or a TIM module. An updated HMI is also required. If you prefer WinCC flexible or another panel package that speaks nativ...

I’m looking to wrap up a small automation package for a mixing system: complete ladder logic, a clean-looking HMI, and a WinCC Explorer-level SCADA project. The PLC side comes first. I’ll supply the process sequence; what I need back is a well-structured ladder program that handles the full mixing cycle, interlocks, alarms, and manual/auto modes. Please stay within standard Siemens conventions so it drops straight into TIA Portal without rework. Once the logic compiles, the operator interface follows. Two panel classes are in scope—Basic and Comfort—so the graphics must resize gracefully. Every screen should include: • Start/Stop controls for the mixer • Speed adjustment with setpoint entry and real-time feedback • Error and alarm re...

I already have a simple completed design and now need it translated into precise engineering ...completed design and now need it translated into precise engineering drawings that cover every detail—inside and out. The job involves producing fully-dimensioned drawings for both the exterior surfaces and all internal components so the part can move straight into manufacturing without further clarification. The entire set must be created natively in CAD NX; no conversions from other software, please. Once finished, hand over the editable NX files along with neutral exports (STEP or PDF) for easy sharing. Accuracy, clear tolerancing, and clean layer organisation are my priorities. Short, efficient turnaround is appreciated, but quality and conformity to standard engineering...