Stepper projectsproiecte

Filtrare

Căutările mele recente
Filtrare după:
Buget
la
la
la
Tip
Aptitudini
Limbi
    Starea proiectului
    926 stepper projects proiecte găsite, la prețul de USD
    Proiect Arduino S-a încheiat left

    Am nevoie de un proiect facut in Arduino in care sa se realizeze : - cu ajutorul unei telecomenzi IR se modeleze un stepper motor , afisandu-se anumite mesaje pe un LCD iar cu ajutorul unui keypad sa se faca accesul acestui proiect. -fiecare tasta reprezinta o etapa pentru pornirea acelui motor iar pentru pornirea sa trebuie sa se urmeze anumiti

    $176 (Avg Bid)
    $176 Oferta medie
    12 oferte

    We want to send existing code instructions from Raspberry to two arduino mega. The inst...instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $143 (Avg Bid)
    $143 Oferta medie
    11 oferte

    I am looking for an engineer who can develop electrical and electronics design (includes programming) for 5 axis stepper motors actuator. The engineer should deliver the project outputs based on the design requirement as per the agreed timeline. [Removed by Freelancer.com Admin - please see Section 13 of our Terms and Conditions]. Engineers from Chennai

    $438 (Avg Bid)
    $438 Oferta medie
    3 oferte

    We want to send existing code instructions from Raspberry to two arduino mega. The inst...instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $96 (Avg Bid)
    $96 Oferta medie
    12 oferte

    We want to send existing code instructions from Raspberry to two ...instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move [conectează-te pentru a consulta linkul URL] the attached file

    $153 (Avg Bid)
    $153 Oferta medie
    19 oferte

    Need help getting my stepper motor to change directions smoothly.

    $14 / hr (Avg Bid)
    $14 / hr Oferta medie
    2 oferte

    We want to send existing code instructions from Raspberry to two arduino mega. The inst...instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $107 (Avg Bid)
    $107 Oferta medie
    15 oferte

    ...intervalometer/timer 2. shoot-move-shoot slider stepper motor controller. I would like to combine these two sketches into a single program. The hardware that i am using: 1. arduino mega2560 (with possibility to change later to teensy or similar, smaller board) 2. pololu DRV8825 stepper motor controller 3. nema 17 bipolar stepper (single axis for the time being,

    $265 (Avg Bid)
    $265 Oferta medie
    8 oferte
    PID Arduino Valve1 S-a încheiat left

    Using a stepper motor attached to a needle valve to control the cooling water, I need the Arduino PID control code to regulate the temperature. Hardware is Uno or Mega, one DS18B20 temperature sensor, 16x2 LCD Keypad shield, MicroStepper, 2 limit switches, 24VDC 2 Amp minimum power supply, Keypad Shield: [conectează-te pentru a consulta linkul URL]

    $136 (Avg Bid)
    $136 Oferta medie
    18 oferte

    This project is to write code to create a mechanical compass using a stepper motor to interact with data coming from a flight simulator software. Hardware to be used is ardunio nano, 28BYJ-28 stepper motor with driver. Output from x-plane is a float value ranging from 0 - 360. Software must allow a smooth cross from 0 to 360 and 360 to 0. I am happy

    $70 (Avg Bid)
    $70 Oferta medie
    11 oferte

    We want to send existing code instructions from Raspberry to two arduino mega. The inst...instructions must be able to be sent from Raspberry to each arduino simultaneously. The the arduinos send the signals to the controllers which move the stepper motors. Each arduino is connected to eight stepper motors and they must be able to move simultaneously.

    $21 (Avg Bid)
    $21 Oferta medie
    7 oferte

    ...using Sparkfun L6470 AutoDriver - v13 connected to Arduino Mega in driving several stepper motors simultaneously. Need connection diagrams and codes. The setup: Two arduinos mega get existing code instructions from RPI, then via eight LS370 controllers drive eight stepper motors. Instructions for setting up Sparkfun L6470 can be found here: https://learn

    $625 (Avg Bid)
    $625 Oferta medie
    4 oferte

    Using a stepper motor attached to a needle valve to control the cooling water, I need the Arduino PID control code to regulate the temperature. Hardware is Uno or Mega, one DS18B20 temperature sensor, 16x2 LCD Keypad shield, MicroStepper, 2 limit switches, 24VDC 2 Amp minimum power supply, Keypad Shield: [conectează-te pentru a consulta linkul URL]

    $288 (Avg Bid)
    $288 Oferta medie
    9 oferte

    I need to control stepper motor with arduino uno. I want to control 2 motors at the same time. firstly i want to rotate first motor only 30 degrees with acceleration (for example. kind of 0->1 -> 2> 3> 4>- ~~~ >100, and it should take 1second reaching from start to the end. and them should rotate back from the end to the start point with deceleration

    $140 (Avg Bid)
    $140 Oferta medie
    4 oferte

    I need a velocio programmer to program my machines run function for an industrial saw. Using an Ace 1430 with a HMI from Velocio. I can provide a list of components, video of machine used and any other relevant information. I would like to control 3 axis of motion with Velocio HM-043AE - 4.3" Command HMI controlling speed and distance travelled in Feet per minute and inches per axis. Also...

    $151 (Avg Bid)
    $151 Oferta medie
    4 oferte

    My project is using 6 steppers with Arduino mega 2560 and [conectează-te pentru a consulta linkul URL] I have problem of loosing steps of motors so i w...to attach optical encoders with my robotic arm for error [conectează-te pentru a consulta linkul URL] my steppers runs with jittering and jurk but when run with GRBL they are smooth so i want to use stepper driving algorthim AMASS of GRBL ...

    $366 (Avg Bid)
    $366 Oferta medie
    11 oferte

    We currently have a PCB we order in low...plugs into a standard Arduino UNO board like a shield. The Arduino uses 1 analog input for a pressure sensor and two other digital inputs for control switches. Output is to a stepper controller. We would like to incorporate the Arduino chip directly into the board in a minimal configuration to run the product.

    $420 (Avg Bid)
    $420 Oferta medie
    42 oferte
    Stepper/in Schäfte Schuhe S-a încheiat left

    Wir sind myVALE - eine 10 Jahre junge Manufaktur, die sich auf die Fertigung von Sandalen mit individuell gefertigtem Fußbett nach eigenem Fußabdruck spezialisiert hat. Jedes Unikat wird mit hochwertigen Materialien und einem orthopädisch modellierten Fußbett gefertigt. Der Kunde erhält den für seinen Bewegungsapparat optimierten Schuh sowie die Möglichkeit d...

    $34 - $286
    $34 - $286
    0 oferte
    Stepper motors (Nema 23) S-a încheiat left

    Hi I need help to setup and control 3 stepper motors (Nema 23) with code. The project is simple. I don't need any system or any logic built. All I need to do is to have 3 stepper motors connected to the computer and be able to send simple commands to them to make them rotate. I'm a programmer but I don't no much about electronics. I'm going to need

    $125 (Avg Bid)
    $125 Oferta medie
    37 oferte

    ...This unit has inbuilt WiFi and RS485 module. Our machine has stepper motors which will communicate with HMI through RS485. I have attached the sample code from the HMI company for RS485 communication . What we need is an android firmware to control the machine. Our machine has 7 Stepper (RS485) + 3 Servo (RS485) + 1 Analog + 3 Digital sensors Expecting

    $311 (Avg Bid)
    $311 Oferta medie
    14 oferte

    I have a linear actuator with a nema 17 stepper motor, as well as two are cylinders to drop a part into a whole. one cylinder grabs the part and the other controls the z axis, ( up and down ) so to speak. Probably would not take a good programmer long and I think I am intelligent enough to relay what I want so it can all be done over freelancer. So

    $15 - $25 / hr
    Local
    $15 - $25 / hr
    0 oferte

    ...This unit has inbuilt WiFi and RS485 module. Our machine has stepper motors which will communicate with HMI through RS485. I have attached the sample code from the HMI company for RS485 communication . What we need is an android firmware to control the machine. Our machine has 7 Stepper (RS485) + 3 Servo (RS485) + 1 Analog + 3 Digital sensors Expecting

    $189 (Avg Bid)
    $189 Oferta medie
    2 oferte

    ...This unit has inbuilt WiFi and RS485 module. Our machine has stepper motors which will communicate with HMI through RS485. I have attached the sample code from the HMI company for RS485 communication . What we need is an android firmware to control the machine. Our machine has 7 Stepper (RS485) + 3 Servo (RS485) + 1 Analog + 3 Digital sensors Expecting

    $204 (Avg Bid)
    $204 Oferta medie
    8 oferte
    building an arduino clock S-a încheiat left

    ...have no idea what to order .Here are the pieces I bought so far: 5Pcs Geekcreit:registered: ATmega328P Nano V3 Control Module Compatible Arduino Improved Version 5Pcs 5V Stepper Motor With ULN2003 Driver Board Dupont Cable For Arduino So this project is to tell me what Arduino I need to get, and where to get it. And a reset button to use when the

    $146 (Avg Bid)
    $146 Oferta medie
    8 oferte

    making a rat trap with pir motion sensor and stepper motor on arduino uno

    $23 (Avg Bid)
    $23 Oferta medie
    6 oferte

    controlling load cell on Arduino uno for controlling stepper motor and solenoid valve

    $22 (Avg Bid)
    $22 Oferta medie
    5 oferte

    I want a 1 axis stepper motor slider with micro switching. It will be use in interview, so it must be very quiete. Just able set speed and thats it. It will be going forward and reverse in endless loop. AccelStepper library will be helpful i hope so. Components: Ill be using stepper motor nema 17 TMC Silentstepstick driver - for quietness. KY-040

    $24 (Avg Bid)
    $24 Oferta medie
    2 oferte

    I need to control induction heating with Arduino and need to connect load cell to Arduino and read the reading and control solenoid wall or stepper motor when desired weight is achieved .

    $140 (Avg Bid)
    $140 Oferta medie
    17 oferte
    Arduino code -- 2 S-a încheiat left

    ...as well as the (2) wiring diagram, to instruct a stepper motor to rise via remote, then lower upon receiving a signal from a sensor or within a certain timeframe if the sensor is not triggered. Device Functionality: The device will raise and lower an arm 90 degrees using a gear attached to a stepper motor. The arm will be raised by pressing a button

    $152 (Avg Bid)
    $152 Oferta medie
    22 oferte

    I have a Raspberry Pi project that uses hardware to receive an entertainment standard data input (DMX512) which controls LED's and stepper motors. The code is open source. I would like to add some new functions, the use of a touchscreen to change parameters within the code. I need a C++ programmer who is familiar with hardward and interfacing it with

    $20 / hr (Avg Bid)
    $20 / hr Oferta medie
    21 oferte

    I need the code to realize an hygrometer/thermometer based...hygrometer/thermometer based on Atmel microcontroller (Attiny 85/ 84 or other avr microcontroller). I wish to read the values from the SHT 31-D sensor and proportionally rotate two stepper motors driven by DRV 8825. Each motor rotates a pointer on a dial to indicate humidity and temperature.

    $230 (Avg Bid)
    $230 Oferta medie
    21 oferte

    I need to control a single linear axis using Arduino and a stepper motor with numerical keypad commands. The range: In fractions is zero to sixty inches.

    $14 / hr (Avg Bid)
    Acord de confidenţialitate
    $14 / hr Oferta medie
    10 oferte

    I need to control a single linear axis using Arduino and a stepper motor with numerical keypad commands. The range: In fractions is zero to sixty inches.

    $11 / hr (Avg Bid)
    $11 / hr Oferta medie
    24 oferte

    Project is a micro plastic injection machine that works off a Nextion display that allows the user to interact with the project. 2x stepper motors needs to be controlled and to be set when at max distance. Heater bands needs to be able to be set in settings to desired temp. project needs to be automated after all settings have been filled in. Push

    $602 (Avg Bid)
    $602 Oferta medie
    25 oferte

    anyone who can help me fix arduino code for stepper motor now

    $5 / hr (Avg Bid)
    $5 / hr Oferta medie
    5 oferte

    i am developing a automation project where i need simple program for 2 at a time stepper motors

    $14 / hr (Avg Bid)
    $14 / hr Oferta medie
    23 oferte

    Arduino Code + Fritzing for: Uno, A4988, Stepper Nema 17, 2 buttons Button 1 44,25 turns , Button 2 0,75 turns. start slow, accelerate to higher speed and slow down less as possible unknown libraries Important: The number of turns needs to be accurate, when you push the button for a bit longer it still should make the right amount of turns. Please provide

    $394 (Avg Bid)
    $394 Oferta medie
    24 oferte

    ...Programs are written using VLSI Solution's Integrated Development Environment VSIDE [conectează-te pentru a consulta linkul URL] We are coding a VS1005 and want to use a stepper motor as an encoder with force feedback. When you turn the wheel and reach a certain point the motor should react and brake for half a second. There is a template that does

    $130 (Avg Bid)
    $130 Oferta medie
    3 oferte

    ...requirements, - Arduino Nano coding: 1. Read potentiometer use this reading as a angle and drive the stepper motor 2. If potentiometer reaches to a predefined position in one direction then motor starts rotating in other direction. also user can set stepper motor speed and operation time after completing time motor stop at predefined position. 3. Design

    $159 (Avg Bid)
    $159 Oferta medie
    3 oferte
    Pressure controller S-a încheiat left

    We need to control a stepper motor with a simple logic algorithm depending on the reading of two analog pressure sensors.

    $508 (Avg Bid)
    $508 Oferta medie
    37 oferte

    Hardware: Arduino UNO, TB6600 3x, Stepmotor 3x With 3 stepper motors, I want to do the following movements: 1. Go to the start and set this as an initial position 2. Move x to position 500, y to position 150 and z to position 640 3. delay(2) 4. x=400, y=400, z=640 5. delay(2) 6. x=200, y=470, z=140 7. delay(2) 8. …. And so on and so on I tried

    $23 / hr (Avg Bid)
    $23 / hr Oferta medie
    15 oferte

    To control a Stepper Motor, I am looking for a RF Remote. Motor forward, Reverse Switch Once motor is forward or reverse, at different points I need a Preset Memories upto 10 Memories to store and Recall when required.

    $271 (Avg Bid)
    $271 Oferta medie
    24 oferte

    I'm building a 3 axis camera motion slider and I need someone who can modify an existing sketch to suit different outputs and also add PS3 bluetooth control using the PS3BT.h library and the AccelStepper.h / MultiStepper.h libraries. This should be a pretty simple job for someone with the right skills as most of the sketch already exists.

    $32 (Avg Bid)
    $32 Oferta medie
    2 oferte

    ...driver (3Nos) 3) Stepper Motor with driver (7Nos) 4) M007 Touchscreen (HMI) Software for HMI: [conectează-te pentru a consulta linkul URL]!AouhlXXdprIt6x5TNRusQYstzHWT. (Use the latest version) Please find the data sheet of all attached along with the schematic of the PCBA. We need to create a simple program to control all stepper and servo motors. Stepper MOTOR 1: &...

    $143 (Avg Bid)
    $143 Oferta medie
    1 oferte

    ...driver (3Nos) 3) Stepper Motor with driver (7Nos) 4) M007 Touchscreen (HMI) Software for HMI: [conectează-te pentru a consulta linkul URL]!AouhlXXdprIt6x5TNRusQYstzHWT. (Use the latest version) Please find the data sheet of all attached along with the schematic of the PCBA. We need to create a simple program to control all stepper and servo motors. Stepper MOTOR 1: &...

    $205 (Avg Bid)
    $205 Oferta medie
    4 oferte

    ...driver (3Nos) 3) Stepper Motor with driver (7Nos) 4) M007 Touchscreen (HMI) Software for HMI: [conectează-te pentru a consulta linkul URL]!AouhlXXdprIt6x5TNRusQYstzHWT. (Use the latest version) Please find the data sheet of all attached along with the schematic of the PCBA. We need to create a simple program to control all stepper and servo motors. Stepper MOTOR 1: &...

    $163 (Avg Bid)
    $163 Oferta medie
    7 oferte

    ...driver (3Nos) 3) Stepper Motor with driver (7Nos) 4) M007 Touchscreen (HMI) Software for HMI: [conectează-te pentru a consulta linkul URL]!AouhlXXdprIt6x5TNRusQYstzHWT. (Use the latest version) Please find the data sheet of all attached along with the schematic of the PCBA. We need to create a simple program to control all stepper and servo motors. Stepper MOTOR 1: &...

    $257 (Avg Bid)
    $257 Oferta medie
    16 oferte

    We are loo...YstzHWT System has the following sections: 1) Capacitive Touch Screen (7 Inch) - Will communicate with the main PCBA through (RS485) modbus protocol. 2) Servo (3Nos) / Stepper Motors (7Nos) - Will communicate with main PCBA through (RS485) modbus protocol. 3) Wifi (ESP) Contact us if you are well versed with the firmware development.

    $396 (Avg Bid)
    $396 Oferta medie
    7 oferte

    Project details: Using information provided via the links below, create a software package that is able to drive multiple stepper motors to specific relative positions, based off data received over Artnet or E1.31. Additionally, create solution for allowing the Raspberry to communicate via RDM status, error messages, and address/universe information

    $1065 (Avg Bid)
    Urgent Acord de confidenţialitate
    $1065 Oferta medie
    10 oferte

    The main goal is to write a program for a ST32 mc that drives a stepper motor driver. (STEP-DIR) The hardware has a touch screen that requires menu system where user can set various settings. Although we already built the hardware but it needs to be changed as we want it to be able to save and store profile settings. Currently we don't have memory

    $1428 (Avg Bid)
    $1428 Oferta medie
    36 oferte