
Closed
Posted
Paid on delivery
Title: Embedded + mechanical engineer: wireless sensor-triggered fluid dispenser prototype Project Build a proof-of-concept of two paired units: a remote trigger and a dispenser. The trigger is either a motion sensor or a weight-threshold pad (wired to the trigger unit). The units link wirelessly so the trigger can be mounted remotely. One trigger pairs to one dispenser. Indoor use. Water-based fluid. Full application details shared under NDA after shortlisting. Requirements User-adjustable on the dispenser: spray duration, activation delay, force, and pattern (fine mist or direct stream) Weight trigger works as a simple threshold trip, same behaviour as motion Both units: rechargeable battery, USB-C charging, and direct USB-C operation that bypasses the battery Enclosure: 3D-print/CNC for prototype, with a clear path to injection molding Production-grade, multi-sourced parts with an alternate for each critical component Wetted path (pump, tubing, nozzle, seals) rated for common additives Deliverables 1 working prototype pair plus 1 spare trigger unit, shipped to me Schematics, Gerbers, firmware source (KiCad or Altium; Arduino/ESP32/STM32) STEP files for enclosures and moving parts Costed BOM Full IP assignment to me on payment. No reuse of the design for other clients. Acceptance Trigger-to-spray latency under 300 ms, excluding user-set delay 20 of 20 consecutive trials pass, per trigger type No false triggers over 60 minutes idle Each setting measurably changes the output Milestones Concept, wireless protocol and pump choice, draft BOM Design sign-off, then schematic/PCB/CAD complete Assembled prototype and firmware Shipped, tested, accepted Apply with all four, or you will be ignored with fixed cost estimate
Project ID: 40803256
32 proposals
Remote project
Active 3 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
32 freelancers are bidding on average $1,265 AUD for this job

Hi, I have worked on an ESP32-based pill dispenser with motor control, magnetic position sensing, Bluetooth controls and battery monitoring. My work included reviewing the electronics, checking mechanical fit and planning hardware improvements. This experience is directly relevant to making your dispenser reliable and easy to use. I would build a paired wireless system supporting both motion and weight-threshold triggers, with adjustable spray duration, delay, strength and mist/stream selection. I would confirm the fluid additives before choosing the pump, tubing, seals and nozzles. Both units would support rechargeable batteries, USB-C charging and direct USB-C operation. The enclosures would be serviceable, with a clear path to injection molding, and the BOM would include alternatives for critical parts. My fixed-price estimate is AUD 1,500, with a 5–7 week timeline, subject to confirming the NDA details and shipping destination. This covers one working pair, one spare trigger, schematics, Gerbers, firmware, STEP files and a costed BOM. Before shipping, I would verify latency below 300 ms, 20/20 successful trials per trigger type, no false triggers over 60 minutes idle and measurable changes for every setting. I accept your milestone structure, NDA and full IP assignment, with no reuse of your design. Best, Oleksandr
$1,500 AUD in 30 days
8.4
8.4

My strength in PCB design, embedded firmware, and IoT product development directly matches this wireless sensor-triggered dispenser. I build integrated hardware-software systems around sensor inputs, wireless communication, rechargeable power, and reliable real-world operation, making me well suited to develop both the remote trigger and dispenser units. My embedded systems and STM32 skills support the required low-latency trigger logic, adjustable activation behaviour, USB-C power operation, and firmware source delivery. Electronics and manufacturing design experience support the schematic, PCB, BOM, and production-minded component choices, while my mechanical engineering and 3D-printing skills align with the prototype enclosures, moving parts, and a clear path toward injection molding. I can deliver the requested concept and protocol work, complete prototype pair plus spare trigger, CAD and manufacturing files, costed BOM, and full IP assignment. I am ready to provide a fixed-cost estimate covering all four milestones and would be glad to build this proof-of-concept with the reliability and documentation your acceptance criteria require.
$750 AUD in 7 days
8.3
8.3

Wireless sensor integration, embedded control, rechargeable power, and prototype electronics are directly aligned with my experience in RF transmitters/receivers, ESP32, Arduino, STM32, embedded systems, PCB design, and product design. I can develop the paired trigger and dispenser electronics around a reliable wireless link while supporting USB-C operation, battery charging, adjustable timing, and control of the pump and user settings. My background includes Altium schematic and PCB design, battery chargers, AC/DC and DC-DC converters, analog circuits, and hardware simulation. I can also produce the requested firmware source for Arduino, ESP32, or STM32, along with schematics, Gerbers, and a costed BOM. My electronic and power-design experience is well suited to a practical proof-of-concept with attention to component availability and alternate parts. I can cover all four requested areas: concept and wireless protocol, complete electronic/PCB design, embedded firmware, and assembled prototype development. I am ready to provide a fixed-cost estimate and take responsibility for delivering the prototype pair, spare trigger, and design files with the requested IP assignment.
$1,250 AUD in 40 days
7.5
7.5

Hi there, The hardest part here is making mist and stream reliable from one small pump, without false triggers. I'd lock the pump, nozzle and wireless link first, so everything else follows. ★ Why me • Battery-powered devices with USB-C charging, power-path and wireless links • Embedded firmware on ESP32 and STM32, from prototype to field • Full stack in-house: electronics, firmware, enclosure CAD and assembly ★ My method • Wireless: ESP-NOW pairing, one trigger to one dispenser, well under 300 ms • Triggers: motion sensor with false-trigger filtering; load-cell pad with adjustable threshold • Pump: PWM diaphragm pump for force; solenoid valve selects mist or stream nozzle • Settings: duration, delay, force and pattern adjustable on the dispenser • Power: Li-ion, USB-C charging, power-path so USB runs the unit directly • Wetted path: PTFE/PVDF parts, EPDM or FKM seals, checked against your additives • Parts: multi-sourced, with an alternate for every critical component • Enclosure: 3D-printed now, designed with draft and wall thickness for injection molding ★ Fixed cost estimate 1. Concept, wireless and pump choice, draft BOM: US$300 2. Design sign-off, schematic, PCB and CAD: US$900 3. Assembled prototype pair, spare trigger, firmware: US$1,200 (incl. parts) 4. Testing to your acceptance criteria, shipping: US$400 Total: US$2,800 ★ Relevant project • ESP32 LoRa node: wireless field board with low-latency triggering and power design Regards, Majeed
$1,500 AUD in 7 days
6.8
6.8

My strongest fit is the combination of embedded electronics and mechanical prototype fabrication needed for your paired wireless dispenser system. I work with Arduino and STM32 firmware, PCB layout, electronics, CNC and manufacturing design, allowing the trigger, wireless link, pump controls, rechargeable power system and prototype enclosure to be developed as one integrated solution. My embedded-systems experience supports motion or threshold-trigger inputs, configurable activation behaviour and reliable wireless communication, while my PCB and electronics skills align with USB-C charging, battery bypass operation and production-oriented component selection. Mechanical engineering, CNC and manufacturing design capabilities cover the dispenser enclosure, moving parts, wetted-path integration and a clear route toward injection molding. I can provide the requested source documentation, CAD files and costed BOM, together with the working prototype pair and spare trigger unit. I also accept the requested full IP assignment and non-reuse condition. I can submit a fixed-cost estimate covering all four milestones and take responsibility for delivering a thoroughly integrated proof of concept.
$1,500 AUD in 18 days
6.9
6.9

Hi there, I carefully reviewed your paired wireless trigger and fluid-dispenser prototype requirements, including motion/weight triggering, sub-300 ms communication latency, rechargeable USB-C power, adjustable spray behaviour, battery-bypass operation, and prototype enclosures with a clear path toward manufacturing. I am a mechanical engineer specialized in mechatronics with almost half a decade of experience in embedded electronics, PCB design, power supplies, hardware prototyping, sensor integration, and electromechanical systems. My background is particularly relevant to combining the trigger electronics, wireless control, pump/actuation hardware, power system, and mechanical enclosure into one practical prototype. Because electronics, mechanical integration, PCB development, and prototyping are already part of my core skillset, I can approach the concept, component selection, schematic/PCB design, mechanical integration, and prototype validation as a complete system while keeping manufacturability and component sourcing in mind. I can provide a fixed-cost estimate once the confidential application details and final prototype scope are available for review. Please send me a message so we can discuss the project and start. Best regards, Samuel tshibangu
$1,125 AUD in 7 days
6.6
6.6

Our combined embedded, electronics, PCB, and mechanical engineering capability directly matches this wireless sensor-triggered dispenser prototype. Modular Solutions works with Arduino and STM32 systems, sensor integration, RF communications, PCB layout, product design, mechanical engineering, manufacturing design, and 3D printing—covering all four disciplines you require. I can deliver the embedded firmware, wireless trigger-to-dispenser communication, rechargeable USB-C power design, adjustable dispensing controls, schematics, PCB files, firmware source, STEP enclosure and moving-part files, and a costed BOM. My electronics and embedded-systems experience supports the motion and threshold-trigger inputs, while mechanical engineering and 3D-printing capability supports the pump, wetted path, enclosure, and prototype fabrication with production considerations in mind. I can also provide the requested prototype pair plus spare trigger, testing against the stated latency, reliability, idle false-trigger, and setting-change criteria, with full IP assignment and non-reuse commitment. I am ready to take responsibility for the complete concept-to-fabricated-prototype scope and provide a fixed-cost estimate covering all four disciplines.
$1,500 AUD in 7 days
6.1
6.1

HI, KINDLY READ THROUGH MY PROPOSAL I will design and deliver a complete proof-of-concept wireless sensor-triggered fluid dispenser system (one dispenser + two trigger units) with adjustable spray parameters, sub-300 ms latency, and full production-ready files under full IP assignment. MY APPROACH ✅ Select reliable wireless protocol and pump suitable for water-based fluid with additives ✅ Design both units with rechargeable battery + USB-C (charge and direct power) ✅ Implement user-adjustable duration, delay, force and spray pattern on the dispenser ✅ Create 3D-printable/CNC enclosures with clear path to injection moulding ✅ Deliver working prototypes, schematics, Gerbers, firmware, STEP files and costed BOM RELEVANT PROJECT - Wireless sensor-triggered dispenser prototype (motion + weight trigger) with adjustable spray parameters, ESP32-based, battery/USB-C powered, and full mechanical + electronics package. DELIVERABLES - 1 working dispenser + 2 trigger units (shipped) - Schematics, Gerbers, firmware source - Enclosure STEP files + costed BOM - Full IP assignment on payment Fixed cost for complete scope: 2000AUD Timeline: 3–5 weeks across the four milestones QUESTIONS 1. Preferred wireless range and any indoor interference constraints? 2. Approximate fluid volume / spray volume per activation? 3. Shipping destination for the prototypes? Ready to start once shortlisted and NDA is in place.
$2,000 AUD in 10 days
6.3
6.3

Custom IoT hardware development spanning PCB design, embedded systems, 3D printing, and ESP32/STM32 firmware makes me well suited to build your paired wireless trigger and fluid dispenser prototype. I can cover the electronics and mechanical prototype requirements, including rechargeable USB-C power, wireless one-to-one communication, sensor inputs, actuator control, and adjustable dispensing behaviour. My experience with Arduino, STM32, electronics, PCB layout, and custom IoT hardware aligns with your need for complete schematics, Gerbers, firmware source, costed BOM, and production-minded component selection. I also work with 3D printing for prototype enclosures and moving parts, with attention to a practical path toward manufacturable designs. The deliverables can be prepared in the requested engineering formats, including STEP files and KiCad-compatible PCB outputs where applicable. I can provide a fixed-cost estimate covering the four requested milestones: concept and BOM, design completion, assembled prototype and firmware, and shipment/testing of the prototype pair plus spare trigger. I am ready to take ownership of the complete embedded and mechanical build under your NDA and IP requirements.
$1,125 AUD in 7 days
5.2
5.2

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Kindly send me message for my previous designs and also so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq
$1,205 AUD in 7 days
5.3
5.3

My background in sensors, energy-harvesting devices, fluid dynamics, mechanics, and materials science is directly relevant to evaluating and documenting this wireless sensor-triggered dispenser prototype. Through my research exposure at IRCBM, COMSATS, I work with sensors and biosensors, nanogenerators, batteries, supercapacitors, fuel cells, advanced materials, and physics-based modeling. I can contribute mechanical-engineering analysis for the dispenser, wetted-path material considerations, force and weight-threshold behavior, pump/nozzle performance, enclosure concepts, and measurable testing of latency, triggering reliability, and output settings. My MATLAB, Excel, OriginPro, and technical documentation experience also supports prototype testing, data analysis, costed BOM preparation, and clear engineering documentation. Mechanical Engineering is among my listed skills, and my research writing background enables precise schematics, specifications, test records, and handover documentation. I am prepared to provide a fixed-cost estimate covering the four requested stages—concept/BOM, design documentation, prototype/firmware coordination, and shipment/testing—within the agreed scope and IP terms.
$1,500 AUD in 120 days
4.9
4.9

Hi, I am willing to sign an NDA. I am ready to build your paired wireless trigger and fluid dispenser prototype, focusing on a motion- or weight-based trigger, adjustable spray settings, and USB-C power operation, following IEC 62133-2, FCC Part 15, IEC 60529, and IPC-2221 standards to ensure a safe, reliable, and test-verified prototype. Project Deliverables: One working prototype pair and one spare trigger unit Schematics for the trigger and dispenser units PCB layout Costed BOM with alternate parts and Gerber files Firmware source code STEP files for enclosures and moving parts Test report against the acceptance criteria Full IP assignment I have a few questions: Q1: What wireless range do you need between the trigger and the dispenser? Q2: What is the required flow rate or spray distance for the pump? I have over 8 years of experience in embedded hardware and mechanical prototyping. Similar projects I have done: Wireless Sensor Triggered Pump Unit with Adjustable Timing and USB-C Charging Paired Remote Trigger and Actuator Prototype with Injection Molding Ready Enclosure Software I can use: KiCad/Altium Designer SolidWorks/Arduino IDE I am ready to start immediately. Thank you! Warm regards, Abubakar
$1,125 AUD in 7 days
5.1
5.1

My multidisciplinary experience in pumps, fluid systems, sensors, automation, and manufacturable mechanical design directly matches this wireless dispenser prototype. I can develop the paired trigger/dispenser concept across the mechanical and electrical sides, including the pump and wetted path, rechargeable USB-C power, threshold or motion sensing, user controls, wireless pairing, and 3D-printable/CNC enclosures with a path toward injection molding. I work with SolidWorks and AutoCAD for assemblies, moving parts, STEP files, fabrication drawings, GD&T, and BOM documentation, while my electrical and automation background covers sensors, control circuits, instrumentation, and Arduino-based development. I can also provide the requested schematics, PCB design outputs, firmware source, costed BOM, component alternatives, and prototype documentation. My experience with pumps, motors, tubing-related systems, and practical manufacturing helps ensure the design is functional rather than merely conceptual. I am prepared to commit to the four requested deliverables—working prototype pair plus spare trigger, complete design files, firmware, and documented testing—with full IP assignment and a fixed-cost estimate. Choose me to develop this prototype as a coordinated mechanical, electronic, and manufacturable system.
$750 AUD in 2 days
4.5
4.5

I have built wireless sensor-to-actuator systems for industrial and research clients, including instrumentation for the Max Planck Institute in Munich and sensor work for US Department of Defense contractors. My approach across your four milestones: M1 — Concept, wireless protocol, pump choice, draft BOM ESP32-C3 (BLE 5.0, sub-100 ms round-trip) or nRF52840 depending on range. Brushless diaphragm pump with PWM for adjustable force, selectable nozzle for mist/stream. PIR for motion, HX711 + load cell for weight. BOM with alternates for every critical part. M2 — Design sign-off, schematic/PCB/CAD complete KiCad schematics, 2-layer PCBs. USB-C with charge-path management so battery is bypassed during wired operation. STEP enclosures designed for FDM with injection-mold-ready geometry. M3 — Assembled prototype and firmware ESP-IDF firmware: user-adjustable spray duration, delay, force (PWM), pattern (valve). Settings in NVP. 20/20 bench-tested before shipping. M4 — Shipped, tested, accepted Prototype pair + spare trigger shipped. All source, Gerbers, STEP, costed BOM delivered. Full IP assignment on final payment. Wetted path: EPDM seals, silicone tubing, PVDF pump head — rated for common water-based additives. Happy to sign the NDA once shortlisted.
$1,250 AUD in 42 days
4.3
4.3

I build battery-powered wireless hardware from the schematic through the enclosure to firmware, and I cover all four of your milestones for one fixed price. A low-power ESP32 LoRa node, an STM32 motor-control board and a 26-finding PCB review are in my portfolio. How I would build it: the trigger unit is an ESP32 with a PIR sensor or a load-cell/force pad on a threshold input, and it sends a short paired message to the dispenser over ESP-NOW. That link keeps trigger-to-spray latency well under your 300 ms, and pairing is one trigger to one dispenser. The dispenser drives a diaphragm pump through a MOSFET stage, with adjustable spray duration, activation delay, force (pump PWM) and a fine mist or direct stream nozzle option. Both units have a Li-ion cell, USB-C charging with power-path management so the unit also runs directly from USB-C with the battery out of the circuit, and a debounced, filtered trigger so there are no false trips over the 60-minute idle test. Wetted parts are chosen with seals in EPDM or FKM, with an alternate part listed for every critical component in the costed BOM. Enclosures are 3D-printed first, modelled in STEP with draft and wall thickness set up for injection molding later. You receive all four milestones in order: concept, protocol and pump choice with the draft BOM; then schematic, PCB and CAD after your sign-off; the assembled pair plus the spare trigger with firmware; and the shipped, tested unit with the 20-of-20 trials logged. KiCad files, Gerbers, firmware source, STEP files and the BOM are yours, with full IP assigned on payment. The fixed price covers my design and development work. The prototype build materials (PCBs, components, pump, print material) and shipping are billed at actual receipts, with the figure agreed before milestone 3 starts. Which additives will go in the fluid, and how much liquid should one spray deliver?
$750 AUD in 28 days
3.3
3.3

Hi, Aashiq (Ash) here from Cape Town, South Africa. This project instantly caught my eye, so I had to reach out. I see you are looking for a proof-of-concept for a wireless sensor-triggered fluid dispenser prototype. The requirement for user-adjustable settings really speaks to my strengths in creating responsive and intuitive designs. I have extensive experience in developing prototypes that enhance user interaction and functionality. My background in mechanical and embedded engineering has helped businesses successfully launch innovative products, and I am confident I can deliver a prototype that meets your specifications. I’d be happy to share samples of my past projects. Based on what you mentioned, here is how we would approach the project: - Develop initial concepts focusing on wireless protocol and user interface - Create detailed schematics and CAD designs - Assemble and test prototypes to ensure they meet your performance criteria You can expect clear communication throughout the process, ensuring a seamless, user-focused solution optimized for performance. Best Regards, Aashiq
$1,350 AUD in 14 days
3.4
3.4

Hello, Your project needs a carefully coordinated embedded and mechanical development process, particularly around reliable wireless triggering, adjustable fluid delivery, battery/USB-C power management, and repeatable prototype testing. I can support the project’s technical planning, requirements breakdown, component research, costed BOM preparation, documentation, and development coordination. However, I want to be transparent that I cannot currently demonstrate verified end-to-end experience independently designing, manufacturing, and validating this type of embedded fluid-dispensing hardware prototype. Before providing a fixed-cost estimate, I would need to review the application requirements, fluid composition, expected spray output, operating pressure, and enclosure constraints. Would you consider a technical development collaboration involving an experienced embedded and mechanical hardware specialist? If so, I can help structure the milestones, deliverables, and acceptance criteria under your NDA and IP requirements. Best regards, Mobasher Reza
$1,125 AUD in 3 days
2.3
2.3

I can deliver a robust, wireless sensor-triggered fluid dispenser prototype, mirroring the successful integration of wireless communication and sensor input seen in similar IoT projects I've completed. My approach focuses on creating a reliable and user-adjustable system. My technical plan involves using an ESP32 microcontroller for both trigger and dispenser units, leveraging its Wi-Fi/Bluetooth capabilities for wireless communication. For the trigger, I'll integrate a PIR motion sensor or a simple load cell with an amplifier for the weight pad, connected to the ESP32. The dispenser will feature a small DC motor or solenoid valve controlled by a MOSFET, driven by another ESP32. User adjustments for spray duration, activation delay, force (via PWM for motor speed or valve pulse width), and pattern (achieved by selecting different nozzle types or valve configurations) will be managed through a simple interface, likely buttons and an LCD, programmed into the firmware. Considering the indoor, water-based fluid requirement, have you identified specific environmental factors that might influence sensor accuracy or material selection? Additionally, regarding the user-adjustable force, are you envisioning a direct force output or a calibrated pump pressure? I’m available for a brief call to discuss these details further.
$1,340 AUD in 21 days
0.0
0.0

Bendigo, Australia
Payment method verified
Member since Oct 27, 2018
$30-250 AUD
$1500-3000 AUD
$250-750 AUD
$10-30 AUD
$250-750 AUD
£250-750 GBP
₹12500-37500 INR
$250-750 USD
₹1500-12500 INR
$250-750 AUD
$15-25 USD / hour
₹12500-37500 INR
£10-15 GBP / hour
$3000-5000 USD
₹750-1250 INR / hour
₹600-1500 INR
₹12500-37500 INR
€8-30 EUR
$1500-3000 USD
₹12500-37500 INR
$15-25 CAD / hour
₹600-1500 INR
$30-250 USD
min ₹2500 INR / hour
$250-750 USD