
In Progress
Posted
Paid on delivery
I need an experienced hardware engineer—or a small multidisciplinary team—to turn FitBug’s first smart wristband concept into a fully-functioning proof of concept. The focus is on engineering a wristband or smartwatch-style device that can reliably capture steps, movement, sleep, heart-rate, blood-oxygen, skin temperature and other stress-related signals, then stream that data over Bluetooth Low Energy to both iPhone and Android handsets. Your work will start with system architecture and component selection, move through schematic capture, PCB layout, and sensor integration, and finish with embedded firmware that manages power efficiently while maintaining robust BLE connectivity. I’m interested in components and design practices that simplify a later hand-off to an ODM, but mass-production readiness is not required at this stage. Deliverables • Fully tested functional prototype wristband • Complete schematics, PCB design files, and BOM (Altium, KiCad, or similar) • Clean, well-documented firmware source and BLE interface documentation • Battery life and sensor accuracy test reports • A concise engineering document package suitable for transfer to a manufacturing partner If you have recent experience with low-power wearable designs, multi-sensor data fusion, or Nordic/Qualcomm BLE chipsets, that will be a big plus. Let me know how you would approach sensor calibration, over-the-air firmware updates, and any clever tricks you use to extend battery life.
Project ID: 40804403
19 proposals
Remote project
Active
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
19 freelancers are bidding on average ₹88,197 INR for this job

A Master’s-trained Embedded Systems Engineer with end-to-end IoT product experience, Nordic nRF52/nRF53 expertise, and professional Altium and KiCad capability is well suited to develop FitBug’s wearable proof of concept. My background covers system architecture, schematic capture, multi-layer PCB and RF design, sensor integration, and embedded C/C++ firmware—the core requirements for a reliable low-power wristband. I develop wireless stacks including BLE and can build firmware around RTOS, DMA, peripheral drivers, and efficient power management. My biomedical instrumentation experience is relevant to integrating health-oriented sensors, while my electronics and product-design skills support a functional, documented prototype with complete design files and BOM suitable for later manufacturing hand-off. I can also provide clear firmware and BLE interface documentation alongside engineering validation work. I would be glad to apply my hardware, firmware, and IoT product-development experience to turn FitBug’s concept into a robust working prototype.
₹100,000 INR in 30 days
8.6
8.6

PCB layout and embedded systems are the strongest match I offer for turning FitBug’s wearable concept into a functional proof of concept. My electronics experience, combined with PCB design and PCB layout skills, supports the hardware development required for a compact wristband prototype. I can contribute to the board design, component placement, routing, and integration of the wearable’s electronics while keeping the design organized for future hand-off to an ODM. My embedded systems background is also relevant to connecting the sensors and supporting the device’s communication requirements, while my broader 3D modeling and CAD experience can help with the wristband’s physical form and enclosure considerations. I would be glad to apply my PCB, electronics, embedded systems, and mechanical design skills to develop FitBug’s prototype and provide clear engineering files suitable for continued development.
₹38,000 INR in 1 day
5.5
5.5

I have more than 12 years of experience in electronics hardware design and firmware development with full product prototype . SO I can do your job within a time limit with your satisfaction.
₹562,500 INR in 90 days
4.9
4.9

Greetings Dear Hiring Manager I can develop your low power wearable prototype with multi sensor integration BLE firmware and PCB design 1. Do you have preferred Nordic or Qualcomm chipsets? 2. Which heart rate and SpO2 sensors are preferred? 3. What battery runtime are you targeting? 4. Should OTA updates work through the mobile app? 5. Is a custom wristband enclosure required? I am waiting in chat to discuss your project in more detail Best Regards Dr Kainat
₹37,500 INR in 1 day
3.5
3.5

My product design expertise can help turn FitBug’s wristband concept into a clear, manufacturable physical form. I specialize in Fusion 360, Blender, STL refinement, 3D printing, product design, and layout design, with a strong focus on detailed, technically considered 3D assets. I can support the wearable’s enclosure and industrial-design development, including wristband form, component fit, enclosure proportions, and prototype-ready 3D models suitable for refinement and 3D printing. My experience with Fusion 360 and STL preparation is particularly relevant for creating accurate housing concepts and resolving physical design considerations before manufacturing hand-off. The profile provided does not include embedded firmware, BLE, PCB design, sensor integration, or wearable electronics experience, so I would contribute most effectively on the product-design and mechanical-prototyping side of this multidisciplinary project. I would be glad to support FitBug with a polished, practical wristband enclosure and prototype design.
₹46,250 INR in 3 days
2.3
2.3

My background in Electrical Engineering, Electronics, and Embedded Systems aligns directly with FitBug’s need for a functional smart-wristband proof of concept. I can contribute to the core engineering work across system architecture, component selection, sensor integration, schematic capture, PCB design, and embedded development for a connected wearable device. I would be pleased to apply my electronics and embedded-systems skills to develop FitBug’s proof of concept and provide a well-documented foundation for its next engineering stage.
₹37,500 INR in 7 days
2.2
2.2

FitBug’s wristband requires hardware, embedded software, and product design to work as one system, which is where my multidisciplinary engineering background is most valuable. I integrate mechanical design, electronics, and software to develop practical prototypes, including schematics, component selection, PCB design, hardware integration, and embedded firmware. My experience with embedded systems and control logic supports sensor and device integration, while my PCB layout and electronics skills align with the complete board-development requirements. I also bring a product-development perspective to the wristband’s physical design, fabrication considerations, efficiency, and future manufacturing hand-off. Working across these disciplines helps me address the device as a unified product rather than separate hardware and software tasks. I can take ownership of the prototype from system design through functional testing and provide clear engineering documentation, firmware source, PCB files, and BOM materials. I would be glad to develop FitBug’s first wearable proof of concept.
₹250,000 INR in 25 days
1.7
1.7

For a wristband PoC, I'd pick a low-power BLE SoC with a proper PPG sensor for heart rate and SpO2, plus an IMU and a skin temperature sensor, so the board stays small and battery life is predictable. I'd calibrate sensors against a reference device, use a dual-bank bootloader for OTA updates, and keep the MCU asleep between sensor FIFO reads. You'd get schematics, PCB files, BOM, documented firmware and test reports in about a month. I've done plenty of low-power STM32/ESP32 boards and firmware, and some are in my portfolio.
₹48,000 INR in 30 days
0.5
0.5

I recently helped a client develop a wearable fitness tracker that integrated multiple sensors for health monitoring. I'll turn FitBug's wristband concept into a reliable proof of concept that captures all the necessary data. Your project will require careful attention to system architecture, component selection, and efficient firmware development. Ensuring robust BLE connectivity while managing power consumption is crucial, especially for a device like this. I’ll focus on simplifying the design for future manufacturing hand-offs. With 6+ years in hardware engineering and a strong background in low-power wearable designs and multi-sensor data fusion, I'm new to Freelancer, so my pricing is flexible while I build reviews. I’ll provide thorough documentation and testing reports as part of the deliverables. Let’s make this wristband a reality. What specific features are you most excited about? Regards, Joshua.
₹56,250 INR in 7 days
0.0
0.0

Hello, I am interested in helping you develop the FitBug smart wristband prototype. I have 10 years of working experience and can help you with this project from planning to final delivery. My approach will focus on reliable performance, efficient battery usage, accurate sensor integration, and stable Bluetooth connectivity. What I can offer: - Complete support throughout the project - Focus on quality and reliable results - Professional and well documented work - Fast delivery within the agreed timeline - Clear communication and regular updates I am confident that I can help you achieve your project goals and deliver 100% effort and commitment. I look forward to discussing the project with you. Regards, nirmal
₹38,000 INR in 10 days
0.0
0.0

Hi, Greetings from OSTronik India! We are a technology-driven company specializing in Power Electronics and Embedded System Design integrated with Artificial Intelligence (AI) and Mobile Application Development, delivering reliable, industrial-grade electronic and software solutions—from concept to mass production, all under one roof. Our in-house capabilities include R&D, Firmware Development, Hardware Design, Mobile Application(Android & iOS), Prototyping, and Scalable Mass Production, with a strong focus on quality, performance, and cost efficiency. Core Expertise: • Microcontrollers: PIC, STM32, ESP Family, AVR. • Microprocessors: Raspberry Pi • Development Tools: MPLAB X IDE, STM32CubeIDE, Arduino IDE, Atmel Studio, VS Code • Hardware Design: Industrial-grade multilayer PCBs using Altium Designer with optimized power design, isolation handling, and EMI/EMC compliance • Communication Protocols: UART, SPI, I²C, CAN, Modbus, MQTT, LAN, S-Bus, RS-485 Mobile Application Capabilities: • Custom Android & iOS mobile applications for device control, monitoring, and data visualization • Real-time dashboards, cloud connectivity, and secure user authentication • Seamless integration between IoT platforms and mobile apps We have successfully transformed multiple concepts into market-ready electronic and mobile-enabled solutions. We would be glad to share a brief reference video. Let’s schedule a meeting to discuss your requirements in detail. Best Regards, Team OSTronik India
₹56,250 INR in 7 days
0.0
0.0

Hi, For a multi-sensor wristband, battery life is usually decided by two choices made early: a BLE SoC with good sleep current (e.g. Nordic nRF52/nRF54 class) and letting the PPG/SpO2 sensor run in its own low-duty-cycle mode with a FIFO, so the MCU wakes in batches instead of per sample. I would design around that from the start, with OTA updates via the Nordic DFU bootloader. Plan (KiCad, firmware in C/Zephyr): 1. Architecture, component selection, power budget, schematic: INR 16,000 2. Compact PCB layout, BOM, bring-up and firmware (sensors, BLE GATT service, sleep/step logic, OTA): INR 24,000 3. Assembled prototype tests, battery and sensor-accuracy report, ODM hand-off docs: INR 18,000 Total INR 58,000, about 6 weeks. Components and PCB fabrication billed at cost. Price and scope are open to discussion. Question: do you need medical-grade accuracy for heart rate/SpO2, or is fitness-grade fine for this proof of concept? Aria Tajeri
₹58,000 INR in 42 days
0.0
0.0

I will develop FitBug’s smart wristband proof of concept through a structured hardware and firmware workflow, starting with system architecture and component selection. I will evaluate low-power BLE platforms, suitable motion and health sensors, battery management, and compact PCB integration. The design will integrate an accelerometer/gyroscope for steps, movement, and sleep tracking, alongside suitable heart-rate, SpO₂, and skin-temperature sensors. I will develop the schematic, PCB layout, and embedded firmware with efficient power management, reliable BLE communication for iOS and Android, and OTA firmware update support. Sensor calibration will include reference-based testing, signal filtering, and validation under different usage conditions. Battery optimization will focus on sensor sampling intervals, BLE connection parameters, sleep modes, and efficient data transmission. Deliverables Functional wearable wristband prototype. Complete schematics, PCB files, and BOM. Documented embedded firmware source code. BLE interface documentation for iOS and Android integration. Battery-life and sensor-performance test reports. Engineering documentation package for future ODM handoff. A reliable, low-power FitBug wearable proof of concept with integrated sensors, stable BLE connectivity, documented firmware, and a clear foundation for future manufacturing. Best Regards, Nadia
₹37,500 INR in 1 day
0.0
0.0

Sindhanur, India
Payment method verified
Member since Aug 7, 2022
₹1500-12500 INR
₹12500-37500 INR
₹75000-150000 INR
₹12500-37500 INR
₹12500-37500 INR
$250-750 USD
£20000-50000 GBP
$250-750 USD
$75-125 USD
₹1500-12500 INR
₹600-1500 INR
₹1500-12500 INR
$10-30 USD
₹12500-37500 INR
$250-750 USD
$250-750 USD
$25-50 AUD / hour
$3000-5000 USD
₹12500-37500 INR
$250-750 USD
₹1500-12500 INR
$250-750 USD
€12-18 EUR / hour
$1500-3000 USD
$250-750 USD