60% Keyboard PCB

@markoa7

With years of experience in PCB design and firmware development, I am confident that I can bring your vision for a premium 60% keyboard PCB to life. I fully comprehend the importance of a sleek design coupled with advanced features like dual-mode connection, LED Lighting, integrated battery-charging and power-management sections, an on-board OLED display and the all-important rotary-encoder knob. Building on my proficiency in layouts following the standard 60% staggered matrix, GPIO pin assignments, and implementing wireless communication systems including Bluetooth 5.1, these aspects present no hindrance to me. Having worked extensively with KiCad and Altium, I am well-versed in creating detailed yet easily understandable schematic designs. My understanding of QMK/VIA enables quicker Bluetooth HID device development. Furthermore, as you'll find from checking my track record, I am adept at harnessing standardized components for maximum compatibility and sourcing unique manufacturer part numbers ensuring availability. Considering my background in RF design and analysis, I have a deeply ingrained appreciation for compact electronics. I ensure high efficiency while maintaining low interference levels to maximize the performance of your device within tight quarters. Rest assured, I will deliver not only a comprehensive schematic but also concise design notes highlighting critical layouts constraints to ensure smooth downstream process for your project.

@yilinw010924

Hello, how are you? I can deliver exactly the kind of premium, compact, production-ready 60% keyboard PCB you’re describing — not just a schematic, but a design that is safe to build, easy to route, and painless to bring up in QMK. I’ve designed Bluetooth HID devices and dense mixed-signal PCBs before, so I’m very familiar with the real pitfalls: USB-C ESD placement, Li-ion charging edge cases, RF antenna keep-out, ground return integrity, and avoiding noise injection into OLED / encoder lines. What you’ll get • Clean, error-free schematic (KiCad or Altium) • Proven, in-stock components (USB-C, BLE 5.1 MCU, charger/PMIC) • Clear pin mapping table ready for QMK/VIA • OLED (I²C/SPI) + rotary encoder wired for multi-layer firmware logic • RGB under-glow & per-key RGB clearly labeled but optional • Design notes highlighting layout constraints (antenna, USB HS, battery routing) I design with the PCB layout phase in mind, so the schematic will drop straight into routing without surprises — especially important in a 60% form factor inside your 302 × 108 mm enclosure. If you want a keyboard PCB that feels engineered, not experimental, I’m ready to start immediately.

@tshibsamuel477

Hi there, I’ve carefully reviewed your requirements and I’m confident I can deliver a clean, production-ready schematic efficiently. I have hands-on experience designing compact consumer electronics PCBs with USB-C, Bluetooth (HID), battery charging and power management, OLED displays (I²C/SPI), rotary encoders, and ESD protection. I’m also familiar with QMK/VIA-compatible MCUs, matrix scanning for 60% layouts, and the typical pitfalls around RF layout, antenna keep-out, and battery routing. I can provide a fully annotated schematic (Altium or KiCad), a supplier-ready BOM, netlist, and concise design notes to accelerate PCB layout and firmware bring-up. My background in mechatronics and PCB design allows me to move quickly while keeping the design robust and flexible for future RGB population options. Feel free to message me so we can get started right away. Best regards, Samuel tshibangu

@hayteekeys

Hi, I can design your 60% dual-mode keyboard schematic (USB-C + BT 5.1) with OLED, encoder, and battery management, ensuring QMK/VIA compatibility. APPROACH - MCU & Matrix: Select QMK-compatible MCU (e.g., nRF52840) with a standard 60% matrix and pin-mapping table. - Power & Comms: USB-C with ESD protection, Li-ion charging/power-path, and BT 5.1 integration. - Peripherals: I2C/SPI OLED header, rotary encoder, and labeled RGB headers (per-key/under-glow). DELIVERABLES - Editable KiCad/Altium schematic + BOM (MPNs/footprints). - Netlist + design notes (antenna keep-out, QMK pin map, ESD). QUESTIONS - Preferred MCU (e.g., nRF52840)? - Per-key RGB or under-glow only? I can deliver the initial schematic in 1-2 days. Best regards, Tobi Daniel

@AwaisChaudhry

Hello, I understand you want a compact 60% PCB with dual-mode USB-C wired and Bluetooth 5.1, built-in battery charging and power management, an on-board OLED display, and a single rotary encoder that handles volume, lighting, and macro commands. I will deliver a clean schematic for a standard 60% staggered matrix with USB-C ESD protection, clear IO for the OLED (I²C/SPI) and encoder, and labeled headers for RGB under-glow and per-key lighting. The design will use a mainstream MCU compatible with QMK/VIA and include a power-path that lets you switch between wired and wireless smoothly, plus battery routing guidance and a keep-out map for the antenna. Deliverables: editable schematic in KiCad or Altium, a BOM with part numbers and footprints, netlist/annotations ready for quick PCB layout import, and brief design notes on critical constraints. A pin mapping table will speed up firmware setup. Which MCU family do you prefer for this build (e.g., STM32, NRF52840), and should we target BLE 5.1 only or also plan for USB-C PD/power-delivery considerations? Best regards,

@AmazingEngr76386

Drawing from my extensive experience as an electrical engineer and designer, I’m intimately familiar with the intricate workings of the kind of compact keyboards you're envisioning. Having previously crafted similar projects, I know the subtleties involved - antenna keep-out areas, high-speed signal routing, power management for efficient battery use in a dual-mode setup. It’s this kind of intimate knowledge that will not only help avoid common pitfalls but also maximize performance and durability. To bring your instructions to life, I'm proficient in both KiCad and Altium, leaving the choice to you. In addition to delivering an editable schematic with an accompanying BOM, I'll also provide design summaries that elucidate crucial layout constraints to faciliate your decision-making process. My aim is to not just hand in a project but to ensure that it fits seamlessly into your workflow.

@Amidst

Hey there! I’m Alok, A PCB, Circuit and Mechanical designer with a passion for turning ideas into rock-solid, high-performance circuit boards. even expert on Python, C, C++ With nearly a decade of experience, I’ve tackled everything from compact consumer gadgets to complex industrial systems—always with a focus on precision, efficiency, and reliability. # Schematic & Layout Design – Clean, optimized, and manufacturable. # Component Selection & Library Management – No surprises, just the right parts for the job. # Reverse Engineering – PCB cloning, replication, and improvements. # Gerber, BOM & CPL Generation – Ready for seamless production. # DFM & DFA Expertise – Because great design means smooth manufacturing. # Multi-Layer, Flex, & High-Density PCB Design – Whatever the project needs. If you need a PCB and Code that’s efficient, reliable, and built for real-world performance, let’s chat. I’d love to help bring your project to life!

@redbrickamerica

Hello! We are prepared to tackle your custom 60% mechanical keyboard project with precision and expertise. Our team will create a top-tier PCB schematic that integrates essential features seamlessly into a compact design. We will ensure a dual-mode connection with wired USB-C and Bluetooth 5.1 for low-latency wireless usage. Additionally, we'll implement an integrated battery-charging section, an OLED display for user convenience, and a versatile rotary-encoder knob for multiple functions. Our layout will adhere to standard 60% staggered matrix, include ESD protection, and use a mainstream MCU compatible with QMK/VIA. We will deliver an editable schematic in KiCad/Altium, a detailed BOM, and netlist/annotations for quick layout import. Let's discuss the details further!

@SMBelectronics

Hey — I’m ready to take this on. I’m different from most bids you’ll get here. I’m a seasoned electronics engineer, not a middleman. I’ve designed compact HID and Bluetooth-enabled embedded boards, and I understand the real-world pitfalls around matrix scanning, BLE power draw, battery charging, USB-C protection, and firmware pin mapping. I have a proven track record, and I’m ready to take full ownership of the schematic so you can move straight into PCB layout and firmware bring-up. Here’s how I’ll save the day: MCU selection that plays nicely with QMK/VIA and Bluetooth 5.1 Proper USB-C implementation with ESD protection and correct CC handling Robust battery charging + power-path management for seamless wired/wireless switching I’ll deliver an error-free schematic in KiCad or Altium (happy to use whichever you prefer), along with netlist/annotations ready for quick PCB layout — sized appropriately for your 302 × 108 mm case envelope. If this sounds like a good fit, let's start a conversation in the inbox (using the chat button below). You can visit my profile to see what past clients say about working with me. Looking forward to it. Abbas Jawadwala P.S. I take on selected projects only, especially enthusiast-grade designs where attention to detail really shows in the final product.

@shykhAbubakar

Hello, I can design a complete, production-ready schematic for your custom 60% mechanical keyboard with USB-C, Bluetooth, power management, lighting, OLED display, and encoder integration. The focus will be clean matrix design, QMK/VIA-friendly pin mapping, and reliable power and signal integrity. All work will follow proven keyboard design practices, IPC and ESD standards. Following are the deliverables: • Schematic design and PCB layout • Gerber and Drill files for manufacturing • Brief design notes • Bill of materials I wanted to ask: • Is the Bluetooth antenna intended to be on-board PCB trace or an external antenna? • Do you have a preferred MCU family (e.g., nRF52, RP2040 + BT module), or should I recommend one optimized for QMK/VIA and Bluetooth HID? I have 7+ years of experience in projects like: • Compact keyboard and HID device schematics • Bluetooth-enabled embedded designs with battery management My software expertise includes: • Altium designer, KiCAD, EAGLE Thank you for considering my proposal. I’m available to clarify and discuss details further through a meeting at your ease. Best Regards, Abubakar

@muhannadbukhamse

Hi there, This is Mohand, a licensed Mechanical and Electrical Engineer with deep expertise in electronics prototyping, PCB design, and microcontroller integration, perfectly suited for your Custom Silver Crest Bolo Tie-inspired 60% mechanical keyboard project. I'm excited to deliver a complete, premium PCB schematic fitting your 302mm x 108mm x 40mm case, featuring dual USB-C wired/Bluetooth 5.1 connectivity, integrated battery management, OLED status display (I²C/SPI), and versatile rotary encoder for volume, lighting, and macros. My experience includes designing compact HID devices, Arduino-based controllers, and QMK/VIA-compatible keyboards with RGB underglow, ESD protection, and precise matrix layouts for low-latency performance. Using KiCad (my preferred tool for open-source compatibility), I'll provide an editable schematic, detailed BOM with available Digi-Key/Mouser parts, netlist for layout import, and notes on critical constraints like antenna keep-outs and high-speed routing. I've successfully prototyped similar Bluetooth keyboards and custom PCBs for mechanical enclosures, ensuring error-free compilation and quick firmware spin-up.

@julianm260

Hello Rglasp, I’ve read your project carefully, and this is exactly the kind of work I specialize in. Migrating an existing Arduino-based project to ESP-IDF isn’t just about “making it compile” — it’s about restructuring the code so it’s stable, maintainable, and takes full advantage of the ESP32 architecture. My Approach -Review your existing Arduino code and identify all dependencies -Map Arduino features to ESP-IDF equivalents (GPIO, Wi-Fi, timers, etc.) -Rebuild the project using native ESP-IDF structure -Refactor logic into FreeRTOS tasks where appropriate -Test on real hardware and validate behavior matches the original -Deliver clean, well-commented source code with build instructions ❓ A Few Quick Questions Which ESP32 variant are you using (ESP32, ESP32-S3, ESP32-C3, etc.)? Does the project rely on any custom or third-party Arduino libraries? If you’d like, you can share the Arduino source code first and I’ll give you a precise timeline and final quote. Looking forward to working with you.

@electronicsdone

Best Mechanical Keyboard PCB Design ⭐⭐⭐⭐⭐ Hi, Thanks for sharing the scope clearly. I’ve supported custom keyboard builds where a complete PCB schematic, component sourcing, and integration with enclosures needed careful planning and precise execution. Your project looks very doable. The goal is simple: deliver a fully functional keyboard PCB with dual-mode connectivity, lighting, OLED display, and encoder functionality—ready for firmware testing and future production. ✅ How I’ll Help You Succeed 1. Review your keyboard layout, matrix, and feature requirements to ensure feasibility and optimal routing. 2. Create a complete schematic in KiCad or Altium that integrates USB-C/Bluetooth, battery management, OLED, encoder, and RGB headers cleanly. 3. Provide a detailed BOM with manufacturer part numbers and footprints, including readily available components. ✅ I’ve delivered compact PCB designs with high feature density, where attention to signal integrity, power management, and modular expansion mattered. ✅ Before I start, one quick thing: Do you have a preferred MCU or any specific OLED/encoder module you want to target, and are there additional lighting effects or features beyond what’s listed? If you share that, we can align quickly and get this schematic ready for production. Best, Prat PCB Must Innovations

@abdurRafiqM

HI, I am an experienced electronics and PCB Design engineer, specialised in use of ECAD software such as Altium Designer, KICAD, EasyEDA, etc. for the the design of electronics and PCB. I will design your projects to meet your Requirements and the industry standard. I do all kinds of circuits such as Power delivery circuit, Sensor Integrated Circuits, wireless control, MCUs etc. I will deliver the following. The Schematics for your Design The PCB for the design Bill of materials(If needed) Gerber, Pick and Place and other manufacturing and assembly drawings needed. Full Support and consultancy till the project is done. Fell free send me message so we can discuss further on your project I look Forward to working with you. Best Regards, Abdur-Rafiq

@peconsultation

Good day, I can deliver a complete, error-free schematic for a premium 60% mechanical keyboard that cleanly integrates USB-C wired operation, Bluetooth 5.1, power management, RGB lighting, OLED display, and a multifunction rotary encoder. I have hands-on experience designing compact HID and Bluetooth-enabled embedded systems with QMK/VIA-compatible MCUs, ensuring reliable pin mapping, clean matrix routing, and firmware-ready documentation. Your design will include proper ESD protection, battery charging and protection, antenna-aware layout guidance, and clearly labeled headers for future RGB expansion. You’ll receive a KiCad or Altium schematic, supplier-ready BOM, netlist, and concise design notes to accelerate PCB layout and firmware bring-up with confidence.

@Physicsdemon

As a manufacturing and industrial engineer with embedded electronics experience, I can deliver a complete, production-ready schematic for your premium 60 % mechanical keyboard. I will design a clean, well-documented schematic supporting dual-mode operation (USB-C wired and Bluetooth 5.1), integrated battery charging and power management, an on-board OLED display, and a rotary encoder with multi-function control via firmware layers. The design will follow a standard 60 % staggered matrix, include proper USB-C ESD protection, and use a mainstream MCU fully compatible with QMK/VIA. I will clearly break out and label connections for OLED (I²C/SPI), encoder inputs, RGB under-glow, and per-key lighting to keep future population flexible. Deliverables include an editable KiCad or Altium schematic, a BOM with readily available components, netlist/annotations for layout, and concise design notes covering antenna keep-out, battery routing, and high-speed signal constraints. The schematic will compile cleanly and be ready for immediate PCB layout and firmware bring-up.

@SolutionMart

My name is "Usama Safdar" and I am a Ph.D degree holder which means I am highly-capable to tackle this project "Content Editor " with 100 percent accuracy. I am a professional writer with over 6 years of experience in writing; Essays, Research Summaries, Thesis, Dissertation, Lab Reports and Case Studies. I always provide High-Quality Solutions within the shortest possible time with all instructions followed against very reasonable prices. I can manage works even with shortest deadlines like; "2500 words work in just 6 Hours" with very reasonable time. As a pro academic writer I am also familiar with all the referencing styles; such as APA, Harvard, OSCOLA, IEE, MLA etc. I always provide plagiarism-free solutions and as a prove I also provide "FREE Turnitin reports". For Samples, please visit my profile https://www.freelancer.com/u/SolutionMart Please message me to start the discussion. Thank You

@leonidye

Hi — I can deliver a clean, production-ready schematic for a premium 60% keyboard that balances wireless reliability, QMK compatibility, and compact routing. I’ve designed custom mechanical keyboard and Bluetooth HID schematics before, including USB-C with ESD protection, Li-ion charging/PMIC sections, OLED integration, and encoder inputs mapped cleanly for firmware use. I’ll select a proven QMK/VIA-friendly MCU and Bluetooth solution, with careful attention to antenna keep-out, power paths, and signal integrity. You’ll receive an error-free KiCad or Altium schematic (your choice), a complete BOM with currently available parts, and a netlist ready for immediate PCB layout. I’ll also include clear pin-mapping tables and concise design notes so bringing up QMK and routing the PCB is straightforward. The 302 × 108 mm case envelope is well within a comfortable range for this feature set, and I can deliver everything within 7 days. Best, Leonid

@TopWritingGuru

My name is Rabia Faisal, I am working in the writing industry since 2011. During this time, I have served countless clients with a full amount of satisfaction by providing them with TOP Quality Solutions. I have command of all references APA, Harvard, IEEE, MLA & Chicago, etc. I will provide plagiarism-free work with 100 percent accurate grammar within your given deadline. Please message me to get Top Class Services. I am waiting; https://www.freelancer.com/u/TopWritingGuru