Development of a Smart Battery managment system

Închis Postat la acum 3 luni S-au achitat serviciile după ce au fost prestate
Închis S-au achitat serviciile după ce au fost prestate

The project should pass by the followings steps :

-Draw a general architecture of the module.

-Components, ICs, controllers selection.

-Draw the schematic based on what is needed as functions.

-Simulate, and test…

-Design the PCB in Multi-layers

-Produce some samples to be tested with battery packs ( it is needed to know what kind of test should be done )

After achieving every step, it is needed to get our approval to pass to the next step.

Below please find the main futures of the BMS we intend to develop :

-Control of battery packs composed of 7 to 15 cells connected in series

-Measurement of the voltage of each cell with resolutions of 1 mV;

-Measurement of the current pack in charging and discharging with a resolution of 10mA;

-Monitoring the temperature (2 channels) of the cells and the board;

-Smart balancing of the cells;

-Measurement of the SOC (State Of Charge) on the level of energy present in the package;

- If you reading this, please write (LMC) word on your proposal

-Blocking of charging and discharging for security issues;

-Bidirectional protection in charge phase;

-Short circuit protection

-Internal clock (real-time clock) for synchronization of data;

-Adjustable parameters for the management of different models of battery packs;

-Historical day register, storing all events;

-400-day cyclical log with daily storage of the main events;

-Technology with a low power consumption of less than 50nA cells with BMS off;

-Detection of battery charger without t external auxiliary connection

-Data transmission with different types of interfaces (UART, RS485 ISOLATED, serial TX opto isolated, USB, Bluetooth)

-Battery status LED

-Acoustic buzzer indicator

-Internal fuse for battery protection

-Graphical interface for connection to BMS Personal Computer.

-APP interface for smartphones.

-Multilayer PCB

-Switch BMS ON OFF on the BOARD

We need to know :

-development timelines required.

-an offer to design and develop the project and assist during the development phases.

for any further clarification, please do not hesitate to get in touch with me.

PCB Layout Design circuit Inginerie electrică Internet of Things (IoT) Battery Charging and Batteries

ID Proiect: #36710353

Detalii despre proiect

16 propuneri Proiect la distanță Activ acum 2 luni

16 freelanceri licitează în medie 9000$ pentru acest proiect


LMC Hi, I'm an electronic engineer with 15 years of experience in the design field. I have experience with BMS systems for Li-Ion/Li-Po batteries and all other parts required for this project. Given the files you sh Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(33 recenzii)

Hello, my name is Hassan and I am an experienced Electrical Engineer and Artificial Intelligence Programmer with a successful track record of leading and executing complex projects. After reviewing your project descrip Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 35 zile
(25 recenzii)

LMC Electronics is a renowned and experienced electronics development company. We have extensive experience in the field of electrical and electronics development and we are well-versed in the necessary aspects of deve Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(37 recenzii)

Hi there! My name is Md Raseduzzaman and I'm an established, heavily experienced Embedded Systems Engineer with 4 years of experience in PCB Designs and Microcontroller Development. I have done projects similar to what Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 30 zile
(13 recenzii)

Lmc Hello | am a verified engineer and preferred freelancer and | have more than 15 years of experience in the embedded systems design and pcb design and electronics systems design. And have good experience in bms , ba Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(19 recenzii)

I have more than 9 years experience in electronics hardware design and firmware development . and i have already worked on like this project using stm32 controlller . So I can do your job within a time limit with your Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 120 zile
(4 recenzii)

My name is Dervis and I am a freelancer specializing in the field of automation. I have worked on many projects in my working life and especially in the area of industrial Automation. I understand that you are lookin Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 21 zile
(7 recenzii)

Battery Management System (BMS) / Power management / Sensor design / Active,Passive Cell balancing: Hey there, I am an experienced electronics engineer with more than 7 years of experience. I have designed Lithium Ion Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(10 recenzii)

Hello, my name is Adnan and I am an experienced and results-driven professional with a track record of success in both corporate and entrepreneurial environments. I understand that you are looking for someone to develo Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(5 recenzii)

Hi there! My name is Kwok Yee Caleb and I am the founder of a highly skilled and experienced fintech/IT startup company with overall 7 Years of experience in the field. We have developed many successful products, such Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(0 recenzii)

Hi There, I've read through your entire requirements and it appears that you're looking for Smart Battery management system. I consider myself a perfect match for this job because I have worked with following below Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 25 zile
(0 recenzii)

Have more than 10 years of Experience in Electronics Product Development, Developed High-Quality Electronics Products. Developed below Products: 1. FPGA & Verilog Code based Boards: Video Processing Board Signal Proc Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 60 zile
(0 recenzii)