Esp pcb with integrated ultrasonic distance measure -- 2

Închis Postat la acum 1 an S-au achitat serviciile după ce au fost prestate
Închis S-au achitat serviciile după ce au fost prestate

Design pcb to house an esp32 module and associated electronics to make distance measurements from 10mm to 140mm.

Accuracy within +/-10mm.

The ultrasonic sensor needs to be mounted external to pcb via a connector.

Do not want ultrasonic modules on pcb, u must design that circuit yourself.

The esp32 will be going into deepsleep, so u must shutdown any current that will drain the battery.

Pcb must accept battery holder.

Deliver the following:

pcb, schematic and libraries (kikad or eagle)

Manuf gerbers

Excelfile with bom (digiket, mouser or RS links)

PCB Layout Electronică Inginerie electrică Design circuit Design pentru produse

ID Proiect: #34793492

Detalii despre proiect

28 propuneri Proiect la distanță Activ acum 1 an

28 freelanceri plasează o ofertă medie de 137$ pentru proiect

binyameen441

Hello, thank you for your job posting. I read your description about--ESP32 PCB I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the Mai multe

$30 USD în 1 zi
(205 recenzii)
7.3
sajjadtaghvaeifr

I am mechatronics enginneer and I have worked on similar projects before and worked on realworld projects that have many sensors and accuators and have iot enabled, And i can do this project and happy to help. i have Mai multe

$140 USD în 7 zile
(67 recenzii)
7.0
quang102

Hi, I have rich experience in Circuit, PCB design, and Software, firmware developement as well, so i can fulfill this project, please ib me if you need more informations, Thanks & Regards.

$200 USD în 7 zile
(36 recenzii)
6.5
Engrusman877

Hi There, I am a senior PhD Level Expert and Have more than 5 years of experience in electronics and embedded design. Just check my profile and share your details. Time and Budget will be discussed. Thanks

$140 USD în 7 zile
(66 recenzii)
5.9
Adeel2k14

I am a professional PCB design engineer i have expertise in designing of PCB board for industrial level products. I am working as hardware design engineer in a reputed firm, where my job is to analyze the working on ex Mai multe

$140 USD în 7 zile
(30 recenzii)
5.3
jensgulow71

Hello, Nice to meet you! I've been watching your project carefully and I'm intrigued by this. And since this assignment is very suitable for me, I would like to work closely with you. Then we will wait.

$200 USD în 7 zile
(9 recenzii)
5.2
lsjlsj04127

Hello? Let's discuss the project through chat so we can get more details and start the project right now. Waiting for you. Thank you very much.

$140 USD în 7 zile
(4 recenzii)
5.2
Faraz281

Hello! We are the right choice for this project. We have our own team of engineers, designers & programmers and we formerly named as “IdeasAssistant Team”. We can do this project professionally because we did many simi Mai multe

$140 USD în 7 zile
(7 recenzii)
5.1
Valuesolutions

Hello, I hope this finds you well. I have just seen your project requiring; Electronics Electrical Engineering PCB Layout Product Design Circuit Design I believe that my 10-year experience in this field is what you ne Mai multe

$200 USD în 7 zile
(20 recenzii)
5.3
PCBDESIGNER38

Hi, Hope you are doing well. I can able to help you in this ultrasonic sensor and ESP32 based PCB design and firmware development. I did the similar project few days ago, while I used the available HC-SR04 ultrasonic Mai multe

$180 USD în 3 zile
(6 recenzii)
4.6
riskindevai

Dear Client. I have read your " Esp pcb with integrated ultrasonic distance measure -- 2" requirement and I am 100% confident that I can complete your project perfectly. My best skills are PCB design and schematic desi Mai multe

$200 USD în 7 zile
(7 recenzii)
4.3
kamilkhalid

Hello. ⭐ ⭐ ⭐ ⭐ ⭐ I have been working for more than 10 Year in the field of Electronic engineering (Hardware / Firmware). I have extensive experience in the areas including Circuit Design, Circuit Simulation (Analog, D Mai multe

$140 USD în 7 zile
(4 recenzii)
4.1
AbedelRamhman

Hi, I have experience in electronics and circuit design and CAD/CAM skills, Ill design the pcb to house an esp32 module and associated electronics to make distance measurements from 10mm to 140mm with ultrasonic sen Mai multe

$60 USD în 2 zile
(13 recenzii)
3.8
NeuraElectronics

Dear Client, I am a good person in the field of Embedded and IoT Development and Electronics. I have created many PCB designs and projects. I have done many projects with Arduino and microcontrollers. So I'm very int Mai multe

$30 USD în 7 zile
(3 recenzii)
3.0
DaGoHEX

I can manager your trchnical request. I Will design a single PCB with ESP and integrated ultrasonic sensors with low consumption conttolled circuitry to offer battery saving functionalities. Of you want ti discuss furt Mai multe

$300 USD în 10 zile
(1 părere)
2.2
HardwareFirmware

Hello I will do you PCB and all the deliverable with KiCad and Eagle PCB if you which both i have got the Ultrasonic Receiver/Emitter HC - SR04 datasheet for your project if you want a different one please recommend m Mai multe

$40 USD în 3 zile
(0 recenzii)
0.0
electricalexprt

So, I will make sure your ultrasonic sensor will measure such that value and I suggest it to use SICK. I will design esp myself with battery in the back, so it just spend minim space(Tiny). I hv experienced in eagle, e Mai multe

$30 USD în 3 zile
(0 recenzii)
0.0
srinivasarao4189

Have 4+ years of pcb design and etching using eagle and easyeda, can deliver minimalistic and robust design that can hold for months powered by a decent battery and can reduce ultrasonic noise with a filtered algorithm Mai multe

$30 USD în 3 zile
(0 recenzii)
0.0
Teqtischn

Hello, Greetings! I have checked your requirements and can support this project. We have experienced team in product development (From scratch to box build) CAD / CAM. Kindly take a look at our website [login to view URL] Mai multe

$120 USD în 7 zile
(0 recenzii)
0.0
Apples1202209

There is a wide experience of development on the basis of any microcontrollers. I will quickly and efficiently develop from scratch or modify your software, develop a circuit and board, and make a prototype. Quickly an Mai multe

$30 USD în 1 zi
(0 recenzii)
0.0