Finalizat

PCB routing and Gerber files

Please, read in full so your submitted proposal won’t be rejected instantly. Also, please do not respond with the general copy-paste text.

For my personal project, I’m looking a guy who could route the PCB, ideally in KiCAD, and prepare Gerber files. Hard part of this project is two PCBs (hard and flex) which need to be connected. So, some sort of plated VIAs. All LEDs will be on a flex PCB. All components on a hard PCB.

What will be provided:

1. DXF/DWG of the PCBs outline.

2. Schematic (in KiCAD).

3. 95% of component pads (in KiCAD).

4. BOM with links to Digikey.

What is this:

It’s LED flash/lighting device for outdoor use.

What you will be working with:

MicroUSB, Microprocessor, LED driver, 8 LEDs, buttons, hard and flex PCB, etc.

Aptitudini: PCB Layout, Inginerie electrică, Design circuit

Vezi mai multe: gerber files frequency meter, freelance pcb routing, pcb routing, gerber files usb protocol, sdram pcb routing, mcb2300 gerber files, olimex gerber files, altium pcb routing, pcb layout gerber delivery, freelance check gerber files errors, freelance generated gerber files, freelance jobs pcb check gerber files, freelance pcb artwork gerber, olimex arm gerber files, pcb gerber files, gerber files pcb project altium, eagle pcb gerber files library, panelization pcb gerber files, express pcb gerber files

Despre angajator:
( 1 părere ) Renton, United States

ID Proiect: #22444615

Acordat lui:

vijay1307

Profile : ---------- over 15 years of experience in PCB layout design. Expertise in EDA layout tools Pads & Allegro. Over 6 years of experience in Ethernet related layout designs with Electrical interface, Optical in Mai multe

%selectedBids___i_sum_sub_7%%project_currencyDetails_sign_sub_8% USD în 7 zile
(25 Recenzii)
5.7

25 freelanceri licitează în medie 182$ pentru acest proiect

shahbaz1980

Hi There, we have gone through the project requirements, we can easily do the PCB routing for flex PCB as well as for FR4 PCB. is it compulsory to use Kicad? We can import DXF files in our CAD tool (Proteus). The d Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 10 zile
(45 recenzii)
6.9
arrijal1992

Hello, I have working Extensively with KICAD in recent 2 years for most of my projects. So, without a doubt I'm very familiar with KICAD. Regarding to Microprocessor, we can use either simple ATMEL ATMEGA, stm32, or w Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 3 zile
(53 recenzii)
6.0
kingch91

Hello, i have read and understood your requirements, you need an expert to route the PCB in KiCAD, and to prepare Gerber files. I am an electronic engineer with 6+ years experience in this field. I can deliver this wor Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 3 zile
(48 recenzii)
5.4
xiaoguang2018

Hello. I have experience about PCB design with Kicad. PCB was 4 layers. But can't I see schematic file you [login to view URL] is not clear. Do you have surce files? Regards.

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(30 recenzii)
5.5
CordWoodTech

We are a team of engineer experienced in electronics, circuit design, PCB design, micro-controller programming, Arduino and wireless protocol. We have designed and developed circuits and products in the field of weara Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 5 zile
(22 recenzii)
4.8
noumanmehtab86

Hi we are a professional team of experience professional serving to industry ,defense and as a freelancing will to provide solution to innovative [login to view URL] are specialized in IoT base solution along with nano watt syste Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 10 zile
(9 recenzii)
4.1
intellisenseIN

Hi there, Yes, we could route the PCB in KiCAD, and prepare Gerber files. And we will provide you:- 1. DXF/DWG of the PCBs outline. 2. Schematic (in KiCAD). 3. 95% of component pads (in KiCAD). 4. BOM with links to Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(2 recenzii)
3.9
anatolyzimin

Hi, I can do your project in Altium Designer. I have an experience with flex+hard PCBs development. I can move your project from KiCAD to AD if you wish.

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(12 recenzii)
5.7
TemaLys

Hi I am very interested in your job as an experienced Hardware and firmware developer. For 7 years, I have been working in this field. I have very good experience with hardware design and firmware develop so can comp Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(4 recenzii)
2.3
RushabhJain18

Hey, I have read and seen all the images which you have attached. I would like to work on this project as I am also experienced in KiCAD software. This project is also challenging so I am excited to work on it. Please Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(3 recenzii)
2.0
amitsinha249

I have Just read project description. And I think it will be an easy project for me. I design Schematic and PCB on Eagle, KiCad, and ORCAD. I can complete your project with perfection. Hi, I am an Electrical and Compu Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 20 zile
(2 recenzii)
2.3
saqib150706

Hello! I am a professional and experienced PCB designer. I have experience working with PCB designs using Kicad, Altium, Eagle, Proteus, and other top-ranked software. I've read your description about Flex PCB and hard Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 2 zile
(1 părere)
1.2
shivshankar69

Hi, I have 28 years of R&D experience in hardware and Firmware design. I have worked with several Processors, microcontrollers and FPGAs'. I have worked with Mentor PADS, Altium and Orcad for PCB design. But I can eas Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 21 zile
(0 recenzii)
0.0
electroartz

Hey, I have previously worked on rigid-flex/flex PCB. If you want rigid-flex PCB we need to design 4 layer PCB and 2 layers are appropriate for separate rigid and flex PCB attached with connector. I also went through y Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(0 recenzii)
0.0
amitsurana92

Hi, I am Amit from India and have 7 years of Experience in PCB Design i can help you in PCB Design+ Gerber Generation and manufacturing and testing of the PCB and PCBA designed.

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 7 zile
(0 recenzii)
0.0
%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 3 zile
(0 recenzii)
0.0
f3liss

Hello, I am quite new here. I have master degree from EE department in the field of RF electronics and high power circuitry. According to your needs mentioned in the description, it won't take too much time to complet Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 3 zile
(0 recenzii)
0.0
Twocan1606

Deliver you the gerber files even before the dead line and posible sugestions about de desing, i'm Electronic Engineer from the slaughter university in Buenos Aires and im looking for some extra Job.

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 20 zile
(0 recenzii)
0.0
CassiopeiaTechET

Dear Sir, My name is Amare, am seals Manager @ Cassiopeia Technologies Plc. Our company have 52 talented Electrical & Electronics, software & firmware, Mechanical and Energy, graphics engineers. In our company we give; Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 5 zile
(0 recenzii)
0.0
FSEVE

Electronics engineer with experience in Large Complex High-Speed IO systems development, Schematics Entries, PCB Layouts and Libraries (schematic, Component/Footprint, Part). Also Programming Firmware, C, C++. Let's Di Mai multe

%bids___i_sum_sub_35%%project_currencyDetails_sign_sub_36% USD în 10 zile
(0 recenzii)
0.0