Pool pump SDA/SCL read/write using ESP32

$10-50 USD

Închis

Data postării:

circa 1 an în urmă

$10-50 USD

Plata la predare

There is a GitHub project that uses this pool pump unit but it seems my pool pump is newer than their pool pump. I built the PCB and the buttons to control it do not work as they should. I am unable to get in contact with the original coder for this project. If you can read and understand the code on their GitHub page then I would like to work with you. There is a lot of other stuff in that GitHub code but the main part I am posting this project for is to read and write to the main pool pump pcb. The project is currently in Visual Studio Code using the ESP32 IDF/PlatformIO Core. The source code compiles just fine and I am able to flash it to my ESP32. It can tell the pool pump is in standby and therefore I know it can read/write with my current pool pump setup. However, the issue is that none of the 6 buttons on the display pcb do anything when they should. I'm not that great at reading code that involves reading/write using hex/binary and SCL/SDA calls. Long story short this code acts as a "man-in-the-middle" between the main pump pcb and the display pcb. As this is a specific project with hardware you will not have in order to work with, I will do my best to test out whatever you feel is needed in order to get the buttons to work correctly for me. Ideally, create some code that decodes the buttons pressing and getting those values in order to send them correctly to the pool pump main pcb.

Microcontroller

C++ Programming

Arduino

ID-ul proiectului: 36492414

Despre proiect

23 propuneri

Proiect la distanță

Activ: 11 luni în urmă

Vrei să câștigi bani?

Adresa de e-mail

Avantajele de a licita pe platforma Freelancer

Stabilește bugetul și intervalul temporal

Îți primești plata pentru serviciile prestate

Evidențiază-ți propunerea

Te înregistrezi și licitezi gratuit pentru proiecte

23 freelanceri plasează o ofertă medie de $23 USD pentru proiect

@binyameen441

Hello! My name is Muhammad, and I'm an electrical engineer with extensive experience in electronics, PCB design, Arduino/microcontroller, TFT and touch screen designs, MATLAB/Simulink and IOT technologies (BLE, Wi-Fi, RF, GSM, GPS, ESP32/ESP8266). I understand you're looking for someone to help you read and write to your pool pump unit's main PCB using the ESP32 IDF/PlatformIO core. If you can read and understand the code on their GitHub page then I would be thrilled to work with you on this project. There is a lot of other stuff in that GitHub code but the main part I'm posting this project for is to read and write to the main pool pump pcb. My skillset includes professional PCB design (EAGLE), ALTIUM, easyEDA and PROTEUS as well as KICAD), Arduino IDE and MPLAB integration. Additionally I have experience in how to use MATLAB/Simulink as well as how to use IOT technologies such as BLE, Wi-Fi and RF. I would be more than happy to help you test out whatever is needed

$30 USD în 7 zile

5,0

(175 recenzii)

7,1

@Adeel2k14

Hello, my name is Muhammad Adeel and I am an electrical engineer with expertise in solving electrical problems. I have designed various electronic circuits and PCB boards using latest electrical design tools such as Proteus, Eagle and Altium. I understand that you are looking for someone to help you code a solution for the issue of 6 buttons not working on your pool pump display unit when it should. Specifically, you would like me to look into the issue of reading/writing with your current pool pump setup. If successful we could work together to create some code that decodes the buttons pressing and getting those values in order to send them correctly to the pool pump main pcb. I believe I am the best fit for this project because of my extensive knowledge of electronics, specifically electrical components and specifically esp32 IDF/PlatformIO core which is needed for this project. Additionally, I have experience in solving electrical problems so I am confident that I can get the job done exactly how you want it done. Please let me know if you would like to discuss further or need any further information about the project or anything else related to it. Thank you for considering me for this job!

$30 USD în 7 zile

4,9

(32 recenzii)

5,5

@elect2eng

can you please send me details of your pool pump. I can write to the pump controller using SCL and SDA. you need to send me the circuit diagram of your pcb so that I will know how the buttons are connected etc. Are you good at using multimeter to measure voltage ? What kind of display are u using?

$50 USD în 7 zile

4,9

(47 recenzii)

5,2

@engineerwinnie

GREETINGS DEAR CLIENT, CERTIFIED EXPERT IN NAMED SKILLS, Dear Client, I have Keenly gone through your project requirements as given in your project description. I gladly inform you that i am in possession of all clearly stated required skills as this is my area of professional specialization having completed all engineering certifications and developed adequate experience in this field. I humbly request you to consider my bid for professional and quality services always, with no timeline and quality excuses, and 100% client satisfaction guaranteed. Message me we discuss more about the project. THANK-YOU and WELCOME.

$50 USD în 1 zi

5,0

(1 recenzie)

2,2

@braincenter

Hello, I am delighted to have come across your project post and express my sincere interest in working with you. As an experienced contractor, I am confident that I possess the skills and expertise required to deliver exceptional results on this project. Over the last decade, I have successfully completed numerous projects similar to yours, and I am confident that I can handle tasks that demand exceptional skills such as; Microcontroller C++ Programming Arduino To ensure we can both get a better understanding of the project requirements, budget, and deadlines, I would love to schedule a chat or message to discuss these aspects further. I am available at your convenience and look forward to hearing back from you soon. In the meantime, I kindly request that you keep me in mind for future projects in case this one is no longer available. Finally, as a freelancer, I firmly believe that data is the pollution problem of the information age, and protecting privacy is an environmental challenge. Therefore, I take all necessary precautions to safeguard any confidential information that you may share with me during the project. Thank you for your time and consideration, and I look forward to the opportunity to work with you. Best Regards, Emma A

$50 USD în 2 zile

2,5

(7 recenzii)

3,4

@assignsolver

I have read and understood all your project details "Pool pump SDA/SCL read/write using ESP32" and I feel my self the best candidate to complete this project with 100 percent accuracy. I have vast amount of experience in this industry since I am working from 2009 as a professional writer. I have huge number of client base in these 12 years. I can write Articles, Blogs, Website Content, CV, Business Plans, Books & eBooks and Product Descriptions. I provide Supreme Quality Work against very low prices even in short deadlines. You may contact me anytime so we can discuss your project in detail. Thank You.

$10 USD în 1 zi

1,0

(1 recenzie)

1,6

@IdealExpert

Hi, I have seen your your project details and I am the "BEST CANDIDATE" for this job "Pool pump SDA/SCL read/write using ESP32". I am an experienced Engineer & Mathematician with more than 8 years of experience who can provide you with Top Notch Solutions as per your requirements within your given deadline and budget. I am M Phil in Mathematics and Graduation in Physics and I have full command of all the areas related to both subjects. My specialties are; LENIAR ALGEBRA, CALCULUS, TRIGONOMETRY, Mathematics, GEOMETRY, MATRIX, Electronics, Digital Logic Design, Circuit Designing, Power System Protection, Communication Systems, and Many More. I have a strong grip on several tools/software such as; Pspice, Multisim, Power Word Simulator, Altium & MATLAB & Simulink. To check my samples, please visit my profile; https://www.freelancer.com/u/IdealExpert Please send me a message to "Hire" me. Thank You

$10 USD în 1 zi

5,0

(1 recenzie)

0,4

@HelpingDoor

I have read and understood all your project details "Pool pump SDA/SCL read/write using ESP32" and I feel my self the best candidate to complete this project with 100 percent accuracy. I am a Highly-Skilled Mathematician and Engineer who can help you to solve all your problems with 100% accuracy. I have a super grip on both niches as I have completed Ph.D. in Mathematics and Engineering. I have more than 5 years of experience in managing academic tasks related to Mathematics & Engineering with an A+ grade. I can help you with; High Power Electronics, Communication Systems, Engineering Problems, Power Engineering, Thermodynamics, LENIAR ALGEBRA, DISCRETE STRUCTURES, DISCRETE, and TRIGONOMETRY. I also have a super grip on various software, such as; LabView, Matlab, Simulink, Multisim, LtSpice, Proteus, and Altium. Please message me, I am waiting for your response.

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@HelpingHut

I am damn sure that I can complete this project "Pool pump SDA/SCL read/write using ESP32" beyond your expectations and within your given time and budget. I am a Ph.D. degree holder in education management with vast experience in the academic writing field. Alongside my team, I provide custom writings that not only meet your requirements but also adhere to the rules of academic writing. I can solve any kind of assignment related to every subject; Business, Public Relations, Economics, International Affairs & Relations, Education, History, Sociology, Psychology and Criminology, Engineering, Mathematics, English, Literature, and Psychology. I will help you to score over 90% grades in all your homework and assignments even with short deadlines. I promise you that I will provide high-quality and plagiarism-free solutions even with "3-Hours" deadline. Please click on "Award" button to hire me. I am waiting for you, "Thank You"

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@FineIdeas

✦◼️✦ "Full-5 Stars Rating✦◼️✦ - ✦100% Marks Guaranteed!✦ I have 9+ years of experience in managing academic writing jobs successfully. I have done my Master's in English Literature, but I have worked with clients completing their tasks for different subjects such as; English Literature, Social Sciences, Finance, Economics, Medical, as well as, Nursing. I have prepared myself all of these professional years to be a multi-tasker, who can help you to get out of trouble for any type of assignment. I always provide my clients with High-Quality Solutions at very REASONABLE PRICES even with SHORT DEADLINES. I can help you with; Case Studies, Research Essays, Online Exams, Quizzes, Summaries, Reports Dissertations ETC. I provide FREE Turnitin reports and countless revisions facility to fully satisfy my clients. and "I PROMISE you with 100% SUCCESS". For samples, visit my profile: https://www.freelancer.com/u/FineIdeas

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@SolutionMart

My name is "Usama Safdar" and I am a Ph.D degree holder which means I am highly-capable to tackle this project "Pool pump SDA/SCL read/write using ESP32" with 100 percent accuracy. I am a professional writer with over 6 years of experience in writing; Essays, Research Summaries, Thesis, Dissertation, Lab Reports and Case Studies. I always provide High-Quality Solutions within the shortest possible time with all instructions followed against very reasonable prices. I can manage works even with shortest deadlines like; "2500 words work in just 6 Hours" with very reasonable time. As a pro academic writer I am also familiar with all the referencing styles; such as APA, Harvard, OSCOLA, IEE, MLA etc. I always provide plagiarism-free solutions and as a prove I also provide "FREE Turnitin reports". For Samples, please visit my profile https://www.freelancer.com/u/SolutionMart Please message me to start the discussion. Thank You

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@toplinesolutions

I have read and understood the details of this project "Pool pump SDA/SCL read/write using ESP32". I am a Highly-Qualified & Skilled ACADEMIC WRITER with more than 10-Years of experience. In last 10 years, I have served more than 2,500 clients and achieved 98% satisfaction ratio of my clients who have scored more than 90% in all their subjects which were handled by me. I strongly believe in customer satisfaction and this is the key factor of my success and I provide a service that gives quality outcome to my clients. I am professionally able to write; Essays, Summaries & Blurbs, Discussions & Replies, Dissertation & Thesis, Lab Reports, and Research & Report Writing. I assure that I will provide plagiarism-free work, also as evidence I will provide you free Turnitin reports. I am familiar with all references and formatting styles; "APA" "MLA" "Harvard" "Chicago" "IEEE" "OSCOLA" and "Vancouver". In order to talk with me, please click on “CHAT” button so we can finalize the deal. Thank You

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@WritingLabb

Pool pump SDA/SCL read/write using ESP32 I am Minahil Hameed with a vast amount of experience in multiple fields like; Finance & Economics, Accounting & Cost Accounting, Business & Management, and Taxation & Auditing. I have achieved a great amount of success in this industry by providing TOP NOTCH solutions to my clients. I always provide quality services & respect to my clients because I consider him/her my BOSS. I provide a friendly environment to my clients so they always feel comfortable and openly discuss their requirements which allows me to produce MAXIMUM results...! Please visit my profile to see my reviews and samples. www.freelancer.com/u/writinglabb

$10 USD în 1 zi

0,0

(1 recenzie)

0,0

@HelpingLab

I am an academic expert who can help you with your solutions like; Case Studies, Summaries, Reports, Thesis & Dissertations, and Online Exams and Courses in almost every language. I am new to this website but I assure you that I will provide you with 100% quality work without plagiarism within your given deadline and budget. I am new here but I am familiar with this industry as I am working here since 2013. Please give me a chance and feel free :) Thank You

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@TopWritingGuru

Pool pump SDA/SCL read/write using ESP32 My name is Rabia Faisal, I am working in the writing industry since 2011. During this time, I have served countless clients with a full amount of satisfaction by providing them with TOP Quality Solutions. I have command of all references APA, Harvard, IEEE, MLA & Chicago, etc. I will provide plagiarism-free work with 100 percent accurate grammar within your given deadline. Please message me to get Top Class Services. I am waiting; https://www.freelancer.com/u/TopWritingGuru

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@InnovationExpert

Pool pump SDA/SCL read/write using ESP32 Hi, I am a Chartered Financial Analyst who is working in a reputable accounting firm for the past 3 years, thus having great experience of these subjects in the practical world. Now, I am here to help what I have learnt and help others in these subjects. I can help you with; Financial Consulting Standards & Analysis, Financial Accounting and Analysis, Cost Accounting and Balance sheet, Interest Rate Risk Management and Cash Flow Statements, Essay Writing, etc. I also have a great working experience on MC-Graw hill, My lab, Blackboard, Person, Canvas, Willay plus. If you are stuck in your regular works and need help in solving Mathematics & Stats, Financial Accounting, Management Accounting or Finance assignments. Then, you are at right place because I can help you with that. Please message me to get my services. Thank You :-)

$10 USD în 1 zi

0,0

(0 recenzii)

0,0

@Muizz93

Hi, I'm experienced in reading the code as well as the electronics circuitry. I understand you encountered problems that is not operating normally. I may be able to fully solve your problems.

$20 USD în 7 zile

0,0

(0 recenzii)

0,0

@kevalthummar5

Hello sir, I have developed many Arduino projects. And also Integrated It with Firebase's real-time database and also fire-store. I can solve your problem. I have also made UI for same. Please give me a chance and let's solve your problem.

$30 USD în 7 zile

0,0

(0 recenzii)

0,0

@archanasajeevan5

I have 4 years experience in pcb designing. I have done several projects related to embedded systems and IoT. If you can share the code and details I will help you to solve the problem of the buttons connected. I will complete the work as soon as possible.

$10 USD în 1 zi